Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. marcuswelby

    SMLT on a Cisco?

    Thank you!
  2. marcuswelby

    SMLT on a Cisco?

    Does Cisco have anything comparable to Split-MLT? thanks,
  3. marcuswelby

    Shortcut to programming NPAs in LD 90?

    Thank you Mr. Poole!
  4. marcuswelby

    Shortcut to programming NPAs in LD 90?

    dlesap - Currently I have no translations provisioned. The NTP states that the NPA must be 3-digits and in my second example is not working because the first digit in an NPA cannot be a "1" My question - is there a shortcut or do I need to program every area code? Can I set up SPNs, say...
  5. marcuswelby

    Shortcut to programming NPAs in LD 90?

    Is there a shortcut in regard to programming NPAs? I tried the following unsuccessfully: LD 90 REQ NEW FEAT NET TRAN AC1 TYPE NPA NPA 12 ESN115 - "Too few digits entered" I then tried: NPA 120 ESN078 - "First digit or second digit of NPA/NXX is invalid" I hope I don't have to enter...
  6. marcuswelby

    Route Members across cards with primary D-channels on each

    Thank you OLD ROLMEN WORKING ON NORTELS!
  7. marcuswelby

    Route Members across cards with primary D-channels on each

    Good Morning All; I know members of a route can span several PRI's, but does that hold true if each PRI has its own primary D-channel? The CO is providing (3) DID 23B+D PRIs with each PRI having its own D-channel. If allowed, does the programming look like this: LD 14 NEW 23 TYPE DID...
  8. marcuswelby

    Testing a PRI circuit

    Thanks again lretrievers!
  9. marcuswelby

    Testing a PRI circuit

    Thanks lretrievers. Another question - even if the length of the number is wrong, I understand that the call will not terminate correctly, but the mismatching lengths will not have an effect on D-channel negotiation, will it? Cheers, John.
  10. marcuswelby

    Testing a PRI circuit

    If the LDNO is set incorrectly on a PRI DID span, will that cause D-channel negotiation to fail? I am seeing the D-channel come up for 20-40 seconds and that and then the CO releases the connection (RLS REMOTE). I have verified the usual suspects, B8ZS/ESF, IFC=NI2, 23B+D, COT=ATT (tried STD...

Part and Inventory Search

Back
Top