Good day,
What is the shortest way to PRT (to see) the NCOS on a specific DN with the line of command.
Thank you
LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND
I have a 2811 (CME) with 4xFXO, 2xFXS, 7941 (ip phone).
1- I would like to be able to receive a call from outside and that both phone will ring in same time (7941 and analog).
2- I would like to be able to call outside from any phone.
3- I would like to be able to call my analog from my voip...
Thanks for your response,
My setup right now is a RJ-11 spitter who's in voice-port 0/2/0, that spitter receive and distribute the phone line. With connection plar 4000 the problem is that everytime I call from my cell phone to my house my home phone line ring and my 7941 (that`s what I want)...
First, thanks for your time !
Router 2811 with 4x FXO card; I would like to receive call to my house phone line and in same time to my voip phone 7941. I can dial out without probleme, Here my basic setup:
Building configuration...
!
ip dhcp pool LAN
network 192.168.0.0 255.255.255.0...
This is what I would like to do:
I have 2x 7940 phone with the same number, I would like to be able to answer a call from one phone when someone is already on the phone with the other one. So I'ts like having 2 line with the same number, but the second line is ringing on the other phone, anyone...
After I flashed my router for 12.4 24 T3 I can't create more than 63 ephone (7940-7941). I had 12.4 12.T4 and it was working fine. I has reading on the net about it and the only thing I found was about a bug, a leak memory.
I didnt change anything on my config, my telephony-services is at...
I would like to know if i can do like a bridge... People who call my number, i will put them in the conference with the other people. It`s possible with hardware no money for that. It's possible for 3 persons... need about 10 persons in conference...
Thanks
LCIS TECH
LAND COMMUNICATION...
Im trying to setup a dish with a receiver SM2100 (viasat) on anik F2 KA-band but i can't find the bird...
I'm used to setting up bell's dish but with this one i need to set up the receiver by telnet. The questions I need to ask are: the frequency search (Mhz)
the number of frequency search...
Thx for your time !!!
HERE:
ip source-route
!
ip cef
ip dhcp excluded-address 10.152.40.1 10.152.40.25
!
ip dhcp pool tacnet
network 10.152.40.0 255.255.248.0
default-router 10.152.40.1
domain-name ****.***.**
dns-server 10.152.41.11 10.152.41.111
option 150 ip 10.152.40.1...
I have 2 network set, I have 2 phone on each network. All the phone from the same network can call each other but can't call the other network. I guess something is missing in my programation but can't find what, help please.
The first network can ping the second network.
Both config about the...
I would like to enable a 911 phone number on my local network. I would like to have my user able to dial 911 when there is an emergency.
The 911 number would be hunting an existing local ex;4048.
so the user when in an emergency would dial 911 to reach the 4048#.
Is it possible, if yes, how...
I'm trying to make international phone call. My sdm-9230 are going thru a option 11c. My problem is that when I try to make a international phone call from one of my sdm-9230 box, it gives me a busy tone(it's not going thru).
North american phone calls work good(1-450-...)But 011 ...are not...
Yes my big probleme its because the call taking to long, I do the # at the end and still not working, I looked in the Voip setup but nothing about timeout or international call.
What I need to do to test the trunk to trunk and sent out over a PRI setup ? THANKS
LCIS TECH
LAND COMMUNICATION...
But I can do international call from my PBX its when I try with a voip phone doesn't work. My setting in my trunk and very standard, all the phone got ncos 6 and they all can call international exept if I pass by my VOIP box. I hope you know what I mean.
LCIS TECH
LAND COMMUNICATION...
My setup right now its a option 11c working with a netperformer SDM-9230, (voip).
My probleme it is : From my option 11c I can do internationnal call, but if I use a voip phone and try to do an internationnal call, after about 10 sec I will hear a fast busy signal. Do I need to change a...
Thank alot for your help...
I would like know how and where can I find the following :
SYS ID for MMail
AUX ID for MMail
VERSION for MMail
storage hour total and % for MMail
Thank you
LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND
I have 3 console pluged, and Im using only :
DB 25 RJ-45
15 ----> 3
2 ----> 4
14 ----> 5
3 ----> 6
and everything work...
LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.