Search results for query: *

We have just installed 2 new G650 and have a CAB-PFL. When I do a test environment it is displaying 01 CAB-PFL 1533 FAIL all other tests PASS Does anyone know if this associated with the fans in the actual chassis or is the issue pointing towards the power modules?

Hi Whats the best way to configure the following senario: Call comes in and needs to ring a group of 6 phones If no one answers after 4 rings then the call gets forwarded to a mobile number? im assuming its either VDN & Vectors or hunt groups with cov ans paths but just wanted to see which is...

Thanks for replying correct the phone profile is set to qsig-MWI and the mailbox ext is also 7570 which is a real ext number It doesnt work on any phones. Its strange that the pbx is telling the MAS that the exts are invalid

Hi Ive just set up a MAS MSS and 2 G650's with 2 S8720 servers I have an issue with MWI, ive followed this doc http://support.avaya.com/elmodocs2/Octel/mm_r2_0/cn88502.pdf and can call voice mail leave messages etc but the MWI light is not coming on. (9620 phones on H323) I can verify that...

ok ive found it in the http script the command is SET PHY2STAT 0 PC Interface Status ## Controls the speed and duplex settings for the PC ## Ethernet interface. ## 0 for disabled ## 1 for auto-negotiate ## 2 for 10Mbps half-duplex ## 3 for 10Mbps full-duplex ## 4 for...

Hi Is there a way to disable the pc port on the bottom of a 9620 phone, we want to stop the users from plugging in their pcs to this port and getting on that particular network.

the ds1 card is a TN2464 if that helps and the dialogic card is a D/600JCT-2E1 (120Ohm) if that helps

Hi Im looking for the pinouts or the cable used to connect the DS1 port at the rear of a G650 to the RJ45 port on a dialocic card on a MAS server. Thanks

ah as i expected a daft issue on my part :) thanks

This is probably a daft issue ive overlooked but... Im setting up a new pbx ( 2 x 8720 and 2 x G650) and when im adding a ds1 to connect to a UK ISDN30 the defauly bit rate is 1.544 and im trying to change the bit rate to 2.048 and its saying "2.048 Bit Rate is incompatible with DS1 circuit...

no i havent, how would i go about doing that?

i need to get a SAT session first and this is where im having issues. Theres another post about this currently active.

I have the exact same issue with S8700 CM 4 and a new install, if you managed to find the answer can you please post. like wise if i manage to work out why i will post

i have tried 5022 which gives me a login and password promt, then as soon as i hit enter on the password the window closes, Ive tried the craft, root and my own added username and password which belongs to the susers and prof18 group.

im doing it from ssh to 192.11.13.6 via putty port 22 to the active server, also tried on the console and get the same result.

Hmm ive done that but everytime i try to initiate a SAT session from the terminal or via ssh it says "Access Denied" thats why i thought i needed higher access. hmm im stuck then

i was hoping to get a higher access than craft.

cheers but we purchased direct from avaya and they are trying to get us to buy support, we dont need support just the password to access the box

Can someone tell me the S8720 root password, you would think they would supply this when you buy the kit

Im just setting up 2 S8720 servers and 2 G650 gateways. The 2 S8720 are reporting that they see each other and appear ok. I can ping other devices on the network including the IPSI cards ip but i cant seem to find out how to tell the S8720 what the IP address of the IPSI is so it can connect...