Search results for query: *

TOPOLOGY INFORMATION ONE CABLE MODEM ACCOUNT WITH SPEED 8Mbps down / 768kpbs up connecting to a dmz switch interfacing 5 dynamic ip addresses. SUBNET #1 LINKSYS BEFSX41 ROUTER 192.168.5.0/24 single wan interface pulls down dynamic dhcp address. registered Dynamic DNS is used to connect vpn...

I assume the clients on the internal subnet can view the intranet web site ok? In IIS right click the site and choose properties. Click the Directory Security Tab. The middle option (IP Address and Domain Name Restrictions) is where you can specify the subnets allowed to access your site...

I have 2 laptops that work in different offices on a weekly basis. Each company is running 2003 small business server. Is there a way that I can configure the windows login on these xp pro laptops to identify and store each SBS configuration? Currently each laptop has to rejoin the network...

have 3 people working remotely from one location. Each person connects via vpn on their own subnet and wan IP. subnet #1 192.168.5.0\24 subnet #2 192.168.10.0\24 subnet #3 192.168.15.0\24 what I have done is introduced another linksys router to create a common shared subnet #4...

I have 3 people working remotely from one location. Each person connects via vpn on their own subnet and wan IP. subnet #1 192.168.5.0\24 subnet #2 192.168.10.0\24 subnet #3 192.168.15.0\24 what I have done is introduced another linksys router to create a common shared subnet #4...

thank you for the fast response and the great information. I will try those settings and see how it helps. Are you familiar with the shared fax services in 2003 SBS? Our users utilize the shared fax quite often and use the email receipt as a fax confirmation. I am researching a way to...

the os drive is a physical 80GB hard disk. there were 2 partitions on the drive. The 2003SBS primary = 10GB and a second Logical for storage = 70 Since then I have removed the logical partition and relocated it. Now I am searching for a way to increase the partition size of the primary...

I am troubleshooting an installation of 2003 SBS on a very full partition. The server OS was installed on a 10GB partition and is now at 90% capacity. I have relocated the logical partition off of the drive and now I have 70 GB of free space to increase the size of the operating system...

I have tested SMTP both inbound and outbound by a telnet session on port 25. I can telnet:25 outbound to yahoo.com and get a response as well as inbound to our exchange server. Telnet:25 also responds within the intranet, confirming SMTP connector is working. SMTP is communicating in both...

Thanks for the posts. Yes the Forwarding DNS servers were already listed. I assume this from providing the DNS server information during the ICW setup for SBS2003. thanks mark. Yes I can ping yahoo.com and also get replies from the resolved IP address. We do have a firewall in place, a...

Hi Mark thanks for the reply. Sorry that it has taken me so long to respond. We have a Business level dynamic IP account with Comcast. So they say, our lease time on the dynamic ip is 6 months and I believe them since it has not changed in over a year. Comcast does not block port 25 at all...

Does anyone know a way to configure a data store and record for outgoing faxes? I know the incoming faxes are logged and accessable from the share point intranet site, is that possible to create for the outgoing faxes as well? Thanks in advance

Thanks for the reply Mark. I did run the ICW twice while troubleshooting and that didn't solve the outgoing issue. I did define 3 external dns servers on the SMTP virtual server. smtpdiag reports clear communication except for my external mx record pointing to our current hosting company...

We have installed a 2003 SBS at a small office < 25 employees. Services are up except for the connection to exchange to send mail. All that seems to happen is the messages time out in the Queue. Am I missing a DNS entry for this outbound smtp traffic to connect? We currently are using an...

Thanks for your responses. I found a LAN / VPN DNS Server address setting in my symantec routers that forwards the DNS lookups thru the vpn tunnel to the 2003 SBS first before using the local dns addresses. This worked perfectly. All I have to do is find out if the Linksys WRT54G and Linksys...

I have one server at the main site running Win 2003 SBS(IP 192.168.0.250). The remote offices login thru a vpn endpoint on a Symantec 360R router. Local : 192.168.0.0/24 router= Symantec 360R Remote1: 192.168.5.0/24 router= Linksys BEFSX41 These are not active yet: Remote2...

Thanks for the response. I have tried that setting and I am still denied. I am sure that this is a DNS issue, I just don't know how to make it work. Can anyone help? thanks mark Josh

I have SBS2003 Successfully running on a small network. The subnet of this network is 192.168.0.0/24 for now. My problem exists in remote offices connecting to this network. The second office 192.168.5.0/24 connects to a Symantec VPN router and the tunnel is functioning. I can remote desktop...