Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dbm0011

    NEC SL1100 - Calls vanish then come back

    Hello Everyone, Thank You for your replies in advance. I have a client with an SL1100 / analog lines out of an Arris Modem from Comcast. Arris modem has been replaced 2 times,, Calls on all lines,, randomely,, intermittently,,, will loose for lack of a better term... "signaling" and call will...
  2. dbm0011

    CP 150 AA - able to dial "9" during AA message and get outgoing line ?

    Thanks to all in Advance !!! I have a client with a MICS 0x32 w/7.0 software and CP 150 We have had some fradulent calls on phone bill.... I accidentaly pressed "9" while listening to the AA and it gave me an outside line which i was able to dial locally and long distance. International calling...
  3. dbm0011

    FWD on Busy/NA to Call Pilot Ext 250 - not forwarding

    SOLVED ..... Main Menu * System Properties * Enable Voice Mail - Check this box
  4. dbm0011

    FWD on Busy/NA to Call Pilot Ext 250 - not forwarding

    Hello, I have a MICS 0x32 with Call pilot 100.... when a call is xferred to any extension with a VMB.. after the set 4 rings attendent picks up and says "this person cannot be reaced" and put them back in the CCR Tree instead of FWD on Busy/NA to VM. the call does ring at the set and we can...
  5. dbm0011

    Call Pilot 100 - VM turned off- still works

    Hello All, I have a client with a cp100. We have recently disabled VM and created a new ccr tree to only xfer call to gen delivery after pressing 1 to leave a message. That being said, somehow,,,, calls are still being xfered to the mailboxes. I have checked table and it is using the proper...
  6. dbm0011

    TDA50G - Basic Programming Setup Steps

    More Questions.. Office Setup - 3 Receptionist's DT343's 9 Users DT333's The DT343's have the NT303 12 key add-on Module. I was under the understanding that this would act as a BLF (Busy Lamp Field) How can I make the Module buttons light up when one of the other extensions is in use? Thanks Don
  7. dbm0011

    TDA50G - Basic Programming Setup Steps

    Hello, I am installing a TDA50G w/ TVA50 VPS. I am having trouble with initial setup. I have the system initialized and 9 phones up and running. What I am looking for is something that can guide me thru the programming process. Example: Step 1 - setup extensions (names, features etc... Step 2...
  8. dbm0011

    How many minutes to re-cable each run?

    I clean up messes all the time. (head turd polisher)...Something of this nature ,,,, if there were correct or at least recent documentation of switch port cabling ,,,All patch cabling would need to be verified. 2 men 40-50hrs each.... 5 days no documentation.... count on 7 days - 2 men 70hrs...
  9. dbm0011

    Inter-Tel AXXESS

    WhyKap.... THANKYOU!!!!
  10. dbm0011

    Inter-Tel AXXESS

    What i need is a manual with the wiring diagram showing what pairs are what port numbers and whether it is dig or analog.
  11. dbm0011

    Inter-Tel AXXESS

    I have been thrown into a phone system situation that i have no knowledge of. How do you program an Inter-tel Axxess system to recognize a conference room type phone. This phone worked with the current system before the system was moved from 1 building to another. I guess the conference rm phone...
  12. dbm0011

    Recpt set....too many lines...and blinking lights

    OK, Very cool.. I imiplemented the F801 and it is working. I am going to leave them using it till the end of the week and see how things go. Thanks for the help. Don
  13. dbm0011

    Recpt set....too many lines...and blinking lights

    Help, I have a MICS0x32 7.0 software with a CP100 attached. No AA is being used during the day...only night services. The receptionist set - 246 has 5 lines that R/A and FNA and FOB to ext 238, and 238 is set to FOB to VM. the problem ext 246 is having is that when she is on the phone and...
  14. dbm0011

    Call Pilot 100 transfering calls - unwanted

    I have 2 sets that have A/R on all lines. All other sets are Appear only. I am still having the issue.
  15. dbm0011

    Call Pilot 100 transfering calls - unwanted

    CFB is off at ext 221. the other extensions need to use cfb and cfna.
  16. dbm0011

    Call Pilot 100 transfering calls - unwanted

    Help, I have a call pilot 100 w/22 mbx. I have 5 lines and a company greeting that comes on after 4 rings if no answer. Now, the problem is that sometimes if ext 221 is busy the line will forward to a random VM immediately. Ext 221 is the only ext set to ring and appear. all other extensions are...
  17. dbm0011

    Transfer Call to External Cell ?

    Dasheen, that is exactly what I am looking for. How do i set up a route? Is there special feature code that has to be programmed to the button I want to use? If so, what is it?
  18. dbm0011

    Transfer Call to External Cell ?

    I have read the all the post's and nothing seems to describe what i am trying to accomplish. 0x32 7.1 /cp100 3.1 I need to be able to transfer an external call to a cell phone. I DO NOT WANT to call forward but actually transfer. I need the recpt to answer the call and be able to push a button...
  19. dbm0011

    Cisco 2924 XLEN - rename interface

    Thanks for all the help. I cant wait to get to the office to try this out. This is all very exciting, dont you think? I will repost later with outcome. Don
  20. dbm0011

    Cisco 2924 XLEN - rename interface

    I am trying to rename the interface 0/1 to an apartment number and int 0/2 to the next apartment number etc... I just cannot figure out what the command line would be. Anyone have an idea? any help is gretly appreciated.

Part and Inventory Search

Back
Top