Search results for query: *

Loopback55 I think your post was deleted? Huntertelephonecollection at gmail doc com

Bringing an Option 11C back to life. Having the PSU serviced. Anyone have a PSU cct diagram or voltage pinout? Thank you

Not sure what i put that was controversial (I own all of the PABXS) Huntertelephonecollection at gmail dot com

Thank you. So BC13-ish :-) We have 5 x MD110s in the pabx collection. Working to get them all fully functioning and interconnected

Can anyone tell me what version/BC this system is? VERSION=CXP1010106/4/TSWSP03/R4A

One of our MD110s has an ESU and dongle/USB for voicemail. All works well (after initial issue with flat CMOS battery) Is it possible to back up the HDD and USB/Dongle so that if either fail a reload or replacement drive can be fitted?

quick update - restarting some program units and the card via FIOL did assist. there is now two way speech (which was one of the faults) but the last fault is I cannot use the PC button on the console to toggle between the ring settings (i.e. short burst and long loud tone).

Hi All, I am an Ericsson novice working with MD110s and other PABXs restoring them in a collection/museum. One of our MD110s has some odd things happening with the console - e.g. cannot turn off loud horn for incoming traffic. Tried swapping keyboards on the console and then tried swapping...

Thank you sbcsu I am looking in there now. I will only download one at a time.

Does anyone have a link to download the programming software for the Hicom 150 PABX - I believe it might be called Manager E. Just got a Hicom 150 into our collection and looking to set it up. Any advice welcome.

Where are you located?

ey Brains Trust, I know these things are all end of life, but i'm working on maintaining some Fujitsu PABXs in my phone collection and future museum. We have several F620 (9600S) and F640 (9600M) PABXs plus one E630 PABX. F620 To have a reasonably 'tricked out' F620 wont be too difficult. A...

PS the Lemo connectors are solid. My ASB30 and ASB100 consoles have them

Thanks you Himdp and snor Seems it is the older type. Let’s hope more of them are decommisioned soon

Thank you inlsp05 and himdp and for linking me to those threads. I will have to get better at searching. I will need to find an OPI-II. With any luck I will get another one being decommissioned soon enough. Will

This is photos of one of the consoles I have https://imgur.com/gallery/BS83pmh Inc part numbers, The two of this type i have are both the same and my guess is they both need ELU5 cards. I will have to find one that runs on an ELU28. MD handsets and consoles are so hard to find even though...

Thank you. I will check the part number tomorrow. It does look old (has a BCS150 style handpiece on it!). I have two but the guy who gave me the other one said it was one for an ELU5. I will probably need to find a newer one somewhere. I have about 300 MD cards so I would probably have a few...

Thank you InIsp05 - That is great. I found one of those consoles in the collection, when I plug in (is it single pair digital?) it just makes a clicking sound (at approx. 3 second intervals). It may be DOA. I do have another somewhere in the collection I will dig out tomorrow and see if it...

Thanks, InIsp05 - hope this helps - let me know any other commands you would like run. It says console type 5? any ideas what type of console that is? <RODAP:ROU=ALL; ROUTE DATA ROU TYPE VARC VARI VARO FILTER 50 TL50 H'00000002 H'00000000 H'00000000 NO 60...

Is there a code that lists things by equipment ? I.e. card location/circuit?