Search results for query: *

That's because 1. It was short-lived because of glitches 2. The upgrade method has over written most of the release 1 series Upgrade method for Callpilot 1xx: Power down Insert the new release card into the front slot Have a smoke or watch the process via serial connection & SSH, "Core Ready"...

NVM Interface - Norstar voicemail series prompts CP Interface - Meridian series prompts The Callpilot was designed to please both Norstar and Meridian users. Example: Head office has a Meridian system, and a remote branch office has a Norstar or BCM...so CP Interface can be an option to keep...

" if I can upgrade a BCM" BCM last release was 6, which I think you may already have? "keep the same phones" Nortel sets are UNIStim firmware but can be converted to SIP firmware. UCX , you can post questions in their forum here at Tek-tips for any info.

Your welcome! Setting Answer mode = Manual is the default, I only suggested to put it back to Manual so you don't run into problems like "dial tone". Line-Private- as I mentioned It does not effect the voicemail and why vmail will still answer because it has it's own way or answering lines...

"Did you find a way to not use dest codes when calling from BCM-FreePBX like FreePBX - BCM I don't need to use a dest code just dialing 3xx" In the lands of Norstar or BCM the first digit range is assigned or reserved for devices such as sets, applications, Call Park and so on. So I wonder...

...you first log into the NAM, press 9 to see the version and note it down so you can post it in future. Curious - Is there a RAD onsite? do Feature 9** and see if it asks for a password. One tip for lines - In the case where the line is ringing at an unknown device aside from voicemail, to...

I also thinking DISA...there is that missing setting "Ans Mode" not posted in the list above in the same section wich should be changed from "Auto" to "Manual". Maybe it's old programming and was DISA back in the day.

"can dial 9 out over BCM" You previously mentioned 2 digit dest codes so I wanted to see the codes, I see now that you use both X and XX so I just wanted to make sure for "9" your Dest/Absorb was 0 and SIP Trunk/Advanced/ Outbound Called Character to Absorb was 1 (or 0 & 2 for 2 digit dest...

@AShammah Do you have screenshots these 3: IP Sub System/General, Dialing Plan/Routing/Destcodes and SIP Trunks/Public/Routing Table I heard it was best to use the numeric IP address of the carriers SIP server instead of name. Your ITSP association method differs from our 3 that use "From...

@AShammah Thanks for splaining Lucy I will get you some Voip.ms settings soon since I have several #'s with them. "All trunks are working now that I set Nat pinhole options to 30" Last I recall that is a factory default setting which is also my setting. I have a system down that just came...

Well...I am highly confused! It's best to keep different issues in different threads. Is everything working then? Is DISA working? Are the Door Phones working? Are all Voip Trunks working? Are all all internal calls working between the systems? "I’m thinking I may just go “green box” What...

Which Callpilot are you referring too? Norstar/BCM or Meridian PBX versions? "upon login?" From remote or onsite? I don't think you can edit the Prompts in any case, I know you cannot on Norstar (Callpilot 100/150) or BCM Callpilot. When you hear the prompt "Mailbox" I think that is the...

Hi M BCM does not have that. I found this site uses a stand alone PC software: https://www.voicent.com/appointment-reminder-phone.php Looks like a good option to use the cloud when all else fails: https://www.callmultiplier.com/

"Gucci" lol Beats the sack I see with others. Glad the D works, as said never had to use it but I will test at a site that has Local Link lines as I have voip.ms trunks (does not support Flash) and residential Rogers (does not support a full Call Transfer, only 3 way).

...Sets/444/Capabilities/ATA Settings/ Disconnect Supervision = Yes Speed Dial/Auto Dial - dialing string: For AA option: XXX-XXX-XXXXP444PPXXXXXXP*6XY Explanation of string in order of appearance (you may need to play with the pauses): First set of X's = Phone/DID number P = One pause (or...

...as this, that I did for fun: You would need proprietary Nortel IP sets to have the full access to features or a connection to an ATA port for * codes as mentioned. On the BCM, Nortel was just about finished the SIP set programming they started on the backend, but they went bankrupt...

Done!

Try these 2 fixes since Chrome, Edge etc no longer support TLSv1 or v1.1 Browser Download, install & open Firefox or Waterfox In the address bar go to about:config In the search bar search for "TLS" Near the bottom look for security.tls.version.enable-deprecated - change it from False to True...

BCM 200/400/1000 WIN 1.X 2.X, 3.0, 3.5, 3.7, Linux 4.1 BCM50 Linux R1, R2, R3, R5, R6 BCM450 Linux R1, R5, R6

Nice, your welcome!