Search results for query: *

Is it possible to establish SIP trunking over the WAN port on a 3300Cxi (Software Release 10.0.1.22)? The reason for my question is that I would like to use the LAN for internal phones but wish to avoid running NAT on the SIP trunks. I just can't seem to get this to work.

I have an XW8000 workstation and want to increase it's RAM. I have seena lot of HP server memory (for ML370G3) on ebay which appears to be the same spec(PC2100 ECC 266MHz DDR 184 pin) however this has a different Compaq part number than that of my machine. Can I install this server memory in my...

I've just got my hands on a NAM. I've connected the fibre to my 824 and have configured up the VM. The NAM also has a network card. What can I do with this? Is it just for remote admin or are there any sexy things I can add like unified messaging, voip or whatever? Is there a way to fing out...

Would any of knowledgable folk know the pinout for the AC15 adaptor? Which pins are the AC15 TX and which are RX? Thanks Mike

Thanks

You probably have this sorted by now but I found that RAD manufacture a box specifically designed to deal with this scenario.

Well you can use one of your spare public addresses for it. Just seems a shame to waste it. What's the make and model of the webcam? If you like, you can send me router config (take out anything sensitive like your crypto keys and real IP address first)and I'll see if I can see whats amiss. My...

Is port 80 the only port required by your webcam?

Is the authentication being performed by the router, a Radius server or what?

The unit is definitely a Mini. It has tiny white Nortel label upon which is printed Startalk Mini. Also it contains a hard drive. I stuck a meter onto the power connector to measure the resistance. This indicated that nothing was connected to pin 4. So I tried an ATA PSU, 24V AC 600ma and it...

Marv0. Are you certain this pinout is for the Mini? My only concern is the 24V~ marking on the front. Thanks Mike

Can anyone tell me the specs and/or pinouts for the power supply on the StarTalk Mini. I've managed to lose the original PSU and need to quickly rig something up. I see 24VAC is mentioned on the front of the voicemail unit and inside it appears as though only pins 1 & 5 are used. Any help much...