Thanks for the replies everyone.
I found a reman tape drive (NT6D45CA-003) for only $210.
Questions
Q: is this drive hot swappable?
Q: how do i force a backup of mmail
Q: how do i translate my nortel pbx model?
ver: 1111
release: 19
issue: 60+
Is this an Opt 11, release 19? What does...
On Monday, for some strange reason the date/time changed to Jan something. I changed the time back and when checking a phone status I received the msg Please wait - loading from disk. I've never received this msg before.
Any thoughts?
ver: 1111
release: 19
issue: 60+
I found out that the PBX is being backed up to floppies and the MMail backs up to a tape drive but our tape drive is broken.
I'm pretty sure there's no USB port to backup to flash. What about connecting a cd-rom?
I got it working by formatting flash again, configure the device interface, gateway, then tftpdnld again.
see the instructions I posted above.
Thank you
How to tftp an image file from rommon mode:
Laptop:
1. ip address: 10.10.10.2
2. mask: 255.0.0.0
3. no default-gateway set
4. asa804-23-k8.bin file in C:\TFTP-Root
5. tftp service is running
6. software firewall turned off
7. str-through cable to asa eth0/0
Firewall:
1. rommon #0>...
I made the following changes:
GATEWAY=10.10.10.2
IMAGE=asa804-23-k8.bin
I successfully tftp the image and booted the asa. I did a write mem and reload and it boots back to rommon mode.
So I then, erased disk0: and tried again with same results
I then download a different image from cisco.com...
I’m getting the following error msg when booting.
No images in /
Error 15: File not found
unable to boot an image
So I’m trying to use tftp in rommon mode but I can not ping anything from either ASA ? laptop or the other direction. I’m not sure I have correct SET variables in rommon...
I’m getting the following error msg when trying to boot an ASA5510.
No images in /
Error 15: File not found
unable to boot an image
So I’m trying to use tftp in rommon mode but I can not ping anything from either ASA <--> laptop or the other direction. I’m not sure I have correct SET...
I need to have a phone ext roll over to a different ext if that line is busy.
If ext3600 is busy, I would like it to rollover to ext3672. We currently have Hunt and FNA set to ext 2770 (Meridian Mail).
Deskphone (2616) Portable Phone (2616)
TN 13 10...
Nortel Option 11c w/ MMail
I'm running through the report of all programmed TNB.
I see several entries for PHNMDM. I'm pretty sure this is for a phantom modem but why would this be programmed? What would it be used for?
We have a Nortel Option 11c using MMail.
I went to LD 20 and printed all TNB.
Under the TYPE colum, there are some I'm not sure what they are.
Type: 500 (analog phone)
Type: 2008 (digital phone)
Type: DTR ???
Type: TIE ???
Type: DID why would this be listed here?
Type: COT ???
We are using a Nortel Option 11c.
1) Is there any way to tell how many Voice Mailboxes are setup?
2) Is it possible to print a list of all Voice Mailboxes or figure out which mailboxes have not been accessed in some time?
Thanks,
Bernie
1. When initiator of a Group Call hangs up the phone, the call is over for all users. How can you program the Group Call feature to not end if the initiator hangs up?
2. We only have one group configured for the Group Call feature, Group 00.
When you initiate a Group Call, the displays on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.