Search results for query: *

Which Windows OS are you running? The roadwarrior mode of the Avaya Softphone version 6 (and also older versions) does not opertae (registers at the CLAN boards) under Vista unless SP2 (of version 6) is being used.

The DHCP scope for the IP phones should have an option 176. This line should have these parameters: HTTPSRVR=<IP ADDRESS OF THE HTTP SRVR>,CODESRVR=<IP ADDRESS OF THE HTTP SRVR>

Hello, We've ran the isdn debug trace at the Cisco GW (at the Nortel side) and the CPN sent from the Avaya side is being displayed at the display_i feild, but still it is not displayed on the remote phone itself. When we ran the trace of calls between the Siemens & the Nortel sides, the...

Hello Doyaya, I have changed the "Supplementary Service Protocol" to a (national) at the trunk group and to a (AT&T) at the signaling group, but still the same problem exists. Are these settings OK? at the trung group there are additional settings.

The Cisco GW is configured to use primary-qsig and this side can't be changed (this GW is connected to a lot of sites with qsig).

Hello Doyaya, Thanks for your reply. Below you can find the trunk & signaling groups of the Avaya and the Cisco GW configuration with its dialing peer towards the Avaya (addresses are masked with X's). Trunk group: display trunk-group 30 Page 1 of 22...

Hello, I am running s8500/G650 ver 2.01 and I am trying to connect my system to 2 other sites via IP trunk. At my system I am using C-LAN & MED-PRO to create the IP trunk (I am not using a Cisco GW at my side). At the second site there is a Siemens Hipath 4000. At the third site there is a...

Hello, You can search the explenations of all denial events at the "Maintenance Alarms for Avaya Communication Manager 2.2, Media Gateways and Servers" PDF file from this link: http://support.avaya.com/elmodocs2/comm_mgr/r2_2/03_300151_3/mainmenu.pdf Note: this is a huge file (2530 pages)