This is the North-we have to wait that long for the routers to thaw out so we can use them...just kidding!
I'll have the routing issues resolved before then, but I have my wrk cut out for me on a number of other issues; our sites are widespread and can only be reached by plane; weather...
I'm bringing up a server 2003 site with about 30 users right now; it's still not connected to the domain, due to routing issues. Everything is set up as "workgroup" at this time, but now I want to set up backups, and need to protect the shares on the desktops. The only way I can think of is to...
Thanks for weighing in on this one, boymarty24. I tried the fixup protocol, no luck; removed it again.
I have been in touch with Aliant, they are the service provider here, and they have set up NAT traversal mode on their VPN concentrator, or so they say. No difference yet...will keep you...
Microdude; tried that; didn't work for me.
boymarty24; no ACL's from inside out. (Someday, when I undrstand this stuff better, ther will be.) When I try to VPN out, the adaptor gets a 22. address momentarily; for about 24 seconds, then loses it. Thanks for the interest.
Here's my sanitized...
Our CFO used Nortel Contivity to VPN to a remote site. Now we changed over to Fibre and put in a PIX 515E, and he cannot connect using Contivity any more. He's connecting through Phase 1, but Phase 2 fails.
I have opened Port 500 (udp), which enabled the Phase 1 to work, but have no idea...
The more I learn about Pix 515, the more I realize how little I know...3 Problems; possible interconnected...
I'm trying to get gisserver (DMZ) to communicate with 10.10.2.2 (Inside) on port 3306. (Mysql) I can ping both ways between these servers. Telnet will connect from 10.10.2.2 to...
I kinda' thought that once I had the ping fixed, it would also create connectivity for the other thing I need: I need port 3306 on 192.168.0.3 (dmz) to talk to port 3306 on 10.10.2.2 (inside). This didn't miraculously happen at the same time, much to my consternation...You're 100% on the fixes...
I've enabled ping with the following access-lists:
access-list acl_out permit icmp any any
access-list acl_dmz permit icmp any any
I've bound these access lists to the outside and dmz interfaces with the following access-groups:
access-group acl_out in interface outside
access-group acl_dmz...
I've been setting up my first Pix for 2 weeks, now, and the more I look at this configuration script, the more it looks right! (But it's not)Set up: inside, outside, and dmz. Allow internet access to the 2 servers (gisserver 192.168.0.3 and server2 192.168.0.24) in the dmz; gisserver has to talk...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.