Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
mapping drives over VPN link
Does anyone know the situation regarding mapping networked drives over a VPN link to transfer files? MS PC's each end linked by BT ADSL VPN terminates on PIX firewall at each end. VPN link is up and running with connectivity. Mapping a drive from one machine to another on the remote side is not...- netmaint
- Thread
- Replies: 1
- Forum: Virtual Private Networks (VPN)
-
Client Cannot Browse Network Neighborhood
If I were you I would add a PIX 501 firewall unit to connect between the Internet and your LAN. This would give you much better security and you can terminate client inbound vpn's on that. You will need a registered IP address from your ISP. Netmaint- netmaint
- Post #7
- Forum: Virtual Private Networks (VPN)
-
PIX 501 - Newbie Help - ADSL
You should set your default route as: ip route outside 0.0.0.0 0.0.0.0 <ip address of router interface connected to the PIX501 outside interface> netmask <most likely 255.255.255.0> metric 1 This means that all traffic destined for the outside will go to the default gateway (the router...- netmaint
- Post #9
- Forum: Security, hacker detection & forensics
