Search results for query: *

Hello, I have recently installed an IP Office for a friend. Thanks in large part to help from some here, I have it pretty much up and running, just trying to figure out a couple odds and ends. Couple questions I have are posted below. Any help is greatly appreciated. Shortcode for 911 dialing-...

Thanks for all the great help so far. I have everything programmed and working. DHCP worked great and phones associated to IPO like a champ. I am waiting for the PRI to be turned up. Once the PRI is turned up, does IPO offer a way to define the Caller ID number being sent out to the PSTN? What...

Thanks for the info! One more question for now. When I install this it will be on a flat network with no vlans. I am assuming the default IP address 192.168.42.1 the IPO has may not be compatible with their network. Am I correct to say all I will need him to do is assign me a new static address...

I have found the "cleanest" way to do this is tftp off the starting config from the first router then tftp it on to the new router as the starting config then issue a reload (Without of course saving the running config). The router will then boot up to the new config. Also make sure the...

Thanks Again for the help! As a follow up to your post above- "2. Hit 100 on the telephone (then next or OK - whatever the phone says), then it will most likely ask you for the password, type that in and hit OK and then it should register and come on line for you." Regarding this...

Thank you for the detailed instructions! So just to be clear, after I create the user, is there something specific I need to do to associate the User to Extension or do I just create an extension that matches the one entered when the user was created and same it. I just looked and I don't see...

Hello, new user to tek tips however I have used this forum often when searching for answers to issues. I am trying to get familiarized with the IP Office 500V2 R9. I have previous experience with Avaya Definity, Partner and several other product lines. I have a system to work with and a few...