Search results for query: *

Thank you very much. A quick follow-up relating to this line: static (inside,outside) tcp [ExternalIP] [port#] [InternalIP] [port#] netmask 255.255.255.255 Is the [Intenral IP] any available ip address on my private (i.e, 192.168.x.x) network, or is this something else?

Hi, I need to let a public ip address (let's use 5.5.5.5) from outside the network into our public network through our Pix firewall. Would this command allow such a thing? conduit permit tcp any host 5.5.5.5

Hi, I've been told by a third-party vendor that my pix is not secure...since I am not too familiar with th e pix, can you please check my config? (I 'x'ed out the specifics). Thanks!! nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24...

Hi, I am working with a client who wants to be able to share an existing dsl connection. I have looked into the BEFSR81 cable router but am not certain if it will work in my environment since all of the workstations require static ip addresses (200.x.x.x) vs the 192.x.x.x that the cable router...

Hi, I need to replace a failed 3524XL switch and want to make it as apinless as possible. I backed up the config.text of the switch that failed (hardware problems) to a tftp server. IS that all I need to back up? How would I then restore that configuration to the new switch? Thanks

Hi there, I have a really annoying problem. I have pcanywhere v 11 on my windows 2000 desktop. When I try connecting to my remote machine, it always works fine the first time. If I close the session and try connecting a second time from this machine, I can here it connect but the pcanywhere...

Here's the rest of the config: cobipix# show intinterface ethernet0 "outside" is up, line protocol is up Hardware is i82559 ethernet, address is 0003.6bf6.bed1 IP address x.x.x.x, subnet mask 255.255.255.224 MTU 1500 bytes, BW 100000 Kbit full duplex 50658 packets input, 58760925...

Hi, This is a follow-up to my post the other day regarding my firewall, which seems to require a reboot every other day to remain functional. I suspect perhaps it is a denial-of-service attack. I cannot telnet into the pix firewall when it is not functional and need to physically re-boot it...

Hi, For the last couple of weeks, the pix firewall I manage has been going down every couple of days or so. A reboot is all it takes to get it back up again, but obviously I need al ong-term solution. Any thoughts of what could be going on, and what I could do to prevent this? ALl of the...

Hi ladies and gentlemen, I am setting up a new pix firewall and I need to leave ports 5631 and 5632 open to allow for pc anywhere connections. My current configuration on the pix firewall is as follows: fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fixup protocol rsh 514...

Hi everyone, Forgive my ignorance on the matter, but I am in a new environment with a cisco pix firewall and need a little clarification on a few things. Basically, I need to go into my pix firewall and open up a few ports for vpn support. My question, though, is at the most basic level - how do...