Search results for query: *

Another quickie whilst your about, when putting access lists on dialers, would this give the same result? global config.. dialer-list 1 protocol ip list 101 interface bri 0 ip access-group 101 ? Thanks, steven

Crash, bang, wallop... Thanks for that, simple things confuse simple minds.

We operate a central POP router with 50+ remote sites using mainly ISDN and serial. I wish to block web traffic over these lines to stop users accessing the internet over there local browser. I previously tried the following: access-list 101 deny tcp any any eq www This resulted in the...

IP-EIGRP: Neighbor 192.168.40.3 not on common subnet for Ethernet0 I get this message when I switch term mon on, its on a 1720 router, here is the config. version 12.2 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname router ! ! ip...

At this point in time, cat5e can do everything cat6 can do, via new compression. I'd be VERY suprised if you noticed a difference between the two media types. Why not buy a few runs of cat6 and test it, to put your mind at rest? steven

Thank you.

SPIDS are only used to define channels for voice and data and we don't use voice so that would have no bearing (pardon the pun) on the problem.

We dont use them on any other routers and we have no problems?

I've tried setting the line speed to 56k i.e. dialer map ip 111.111.111.1 speed 56 name ***** ********** but no joy....

any gen?

Hi, I've setup a router to play with over ISDN, I'm using our pop router at the other end and all is well if I connect from that... I.e. incoming connections to the router I'm playing with are fine. I just can't make an outgoing call via ISDN. Heres the config: Current configuration : 2259...

Hi, I've disabled spantree portfast on the required port and the same problem is still occuring :(

Could you explain a bit more please? cheers, steven

http://erc.qmuc.ac.uk/mig/file.php?image=mig_solarwinds.jpg Hi, To view the image please copy and paste the link into a fresh browser window. Could anyone tell me if the amount of receive errors shown is normal for a 512k serial link? thanks, steven

ignore that last question.... the pennys just dropped ;-) thanks for that, you've been a great help. steven

So its good to use it on all PC's but not on the backbone?

At a site we have a cisco catalyst 4000 acting as a layer 2 switch. About 9 months ago this was installed and we swapped from the previous 3com hub setup to the switched setup. The problem is that there are about 20 machines with windows 95/98 running netware clients still running from the 3com...

Hi, I've been tasked with looking into VLANs for our network. We don't have any special departments as such, all users use the same apps apart from finance. So, I was thinking of segementing off the servers onto a VLAN, the IT department onto another VLAN then by department...etc I was...

cool, So I'll just put aux instead of the brio int?

I want to connect two 1603's via the ISDN interface at home. Is there a means of replicating the TEI etc via some cabling setup so I can play with the two routers? probably not but I thought I'd ask anyway. Cheers, steven