Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: croth
  • Order by date
  1. croth

    TACACS+ failover

    Check you have the following aaa new-model aaa authentication login default tacacs+ local aaa authentication login localcon local aaa authentication login telnet tacacs+ local aaa authentication login async tacacs+ local aaa authentication ppp default tacacs+ local aaa authorization exec default...
  2. croth

    Switching/routing problems with a 4908G

    Is IP routing enabled on the switch? command: ip routing :in global config mode. Also are you using RIP or OSPF? For your DHCP server add the command, IP HELPER-ADDRESS <ip of dhcp Server> to the interfaces and allow ip directed broardcast.
  3. croth

    Exec Password change for a 3500XL

    Go into Global Config mode. i.e. conf t Then type, enable secret <password>
  4. croth

    Help with distribution

    I need to implement an OSPF (Cisco) Routing protocol into a 3Com (RIP) Domain, mainly because our network has out grown RIP. The problem I have is with distribution between the two. On the Cisco router I have the following config. Onj the 3Com corebuilder only RIP is running (version 2) router...
    • croth
    • Thread
    • Replies: 1
    • Forum: Cisco
  5. croth

    Redistribution of RIP and OSPF

    I have an exsiting network that runs RIP, but I now want to implement OSPF. Straight forward if both routers were Cisco. The RIP network has a 3COM 3500 Corebuilder and Im now starting to use Cisco routers and switches. This is the border where I now want to use OSPF. Anybody any answers to the...
    • croth
    • Thread
    • Replies: 0
    • Forum: Cisco
  6. croth

    Unknown ISDN dialup's

    It is more likely to do with WINS DNS and Netbios. Try using an access-list with a time range, have a look at this site. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c/ipcprt1/1cdip.htm#22601
  7. croth

    ISDN Line comes up unexpected 1603 router

    OOps sorry here is the site. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c/ipcprt1/1cdip.htm#22601
  8. croth

    ISDN Line comes up unexpected 1603 router

    Have a look at this site. You can apply a Time-Range to your ISDN line through access-lists.
  9. croth

    801-clock settings missing

    Thanks soupnazi. So basically the 801 does not remember the time on reload. Am I right in saying this, the only way it would work is if I had a NTP Server?
  10. croth

    801-clock settings missing

    When I recently setup an 801 to use ISDN dialin, I set the clock and date. But on reload it does not remember the setting. We do not use an NTP server, so is there a way for it to store and remember the setting on power down?
    • croth
    • Thread
    • Replies: 2
    • Forum: Cisco

Part and Inventory Search

Back
Top