Search results for query: *

CORRECTION CPU 1 is the one that was replaced.

>ld 22 PT2000 REQ issp 30/05/09 09:20:18 TID: J00035 VERSION 2521 RELEASE 4 ISSUE 50 W IDLE_SET_DISPLAY NORTEL SYSTEM HAS NO IN-SERVICE DEPLISTS SYSTEM HAS NO IN-SERVICE PEPS LOADWARE VERSION: PSWV 123 INSTALLED LOADWARE PEPS : 0 REQ prt TYPE cinv 0 15 NT5D10AA 01 NNTM1831N7N3 CP...

OK, this is causing a headache. After 10-15 minutes of CPU/CMDU 1 being active, we get this sequence: HWI529 CMB: Primary CP can't access secondary CP Check both the CMB cable and the standby CP CIOD126 CMDU 0 DISABLED: due to SPLIT mode HWI529 CMB: Primary CP can't access secondary CP...

What I'm looking for is a cheap way to use my small laptop as a focusing monitor, rather than spend the money on an actual test monitor. There are actually about 75 cameras & it's easier to focus a fixed camera locally than it is to try & have someone at the head-end communicating adjustments...

Does anyone know of a external card with a BNC input that will allow a laptop to be used as a test monitor for a standard NTSC video format on a CCTV system. I help maintain our camera system. At my old job we had small testing monitors for focusing cameras, but I'm just wondering if there is a...

In the server properties, under bindings, only the primary address showed up. I found this article: http://technet2.microsoft.com/windowsserver/en/library/2329ffdb-717f-4d63-a0fd-97e412667b7b1033.mspx?mfr=true After reading it I just decided to go with the 2 NIC method. After statically...

Okay, more background info: Our building is a convention center. We provide public IPs on multiple vlans to clients. The Layer 3 switch subnets them & has 3rd party equipment behind it for bandwidth management & other management of client connections. Unfortunately, these other subnets are...

I think it's a Cisco 3600 series. Without going down & looking at it, I'm not sure of the exact model. Currently, fe1/0.1 has 3 ip addresses on it, with no vlans. The 3rd address that I haven't mentioned is irrelevant. It's just routing a bunch of other addresses to a Layer 3 switch that we...

I'm familiar with helper-addresses, but I've only used them across vlans or WANs. To clarify, the gateway addresses are separate secondary addresses on a single router interface, with no vlans--xxx.xxx.33.1(existing), xxx.xxx.36.1(new). I think your saying I can apply the...

We have 2 ip networks with separate gateways on a single router interface. One was existing with DHCP services provided by a Windows 2003 Server. The new network works fine with static IPs, but when we add it's scope to the DHCP server we cannot get an address. The NIC on the server has 2...

The company wants to get a wireless headset for the attendant console. From some old threads I gather that these exist. However, their main reason for this is not so the receptionists can leave the desk while on a call, but so that they can answer calls while away from the desk. Is this...

We are trying to set up Desktop messaging with CP 04.04.04. Everything seems to be functioning correctly at this point. Our current problem is we can't seem to make 2 VPIM shortcuts work for 1 site. We have 4 local prefixes at our site, 2 that really use voice mail. In Message Network...

Question: How do you get it to transfer to an external local number. i.e. 9+ 10 digits?

I'll keep these suggestions in mind, should a situation arise where this is an issue. For now though, like I said, these particular numbers have no purpose but for temporary use. If anyone calls them, they are either intentionally cold calling a random number or have been given an incorrect...

Thanks x11, that's what I thought. ace, Thanks. That is a good point, however, most of our business #s are tied to positions rather than names. In the 5 years I've been here, I can't remember outing a number of any significance. I work at a convention center. The DIDs I've been concerned...

Okay, thanks for giving me some clarification. I made the change (ovf ovf ovf ovf) & it works! It sounds like Integra is tacking their own "disconnected number" message to it, but I think that's fine with us. Thanks again, both of you, for your input.

I checked the ctvn & confirmed it is the default but in the book there is no other option for entry. Is the whole thing just reentered manually? Also, this has always been the setting, since 1990. Would PRI change how it's treated? These aren't really vacant #s either. They're really...

I still can't find anything in the cdb that is causing this. There is no vnr. A little more on what is happening: 1 specific block is xxx-5900-5999, none of which are programmed. If a call comes in for one from the outside, the console receives the call on our main # with a 59 on the...

Our console (2250) is receiving calls on our main facility line for DIDs that we don't even have programmed. How the callers are getting the numbers doesn't really concern me, but when they are called we want the result to act like a disconnected line, i.e. fast busy. Our phone provider says...