You need two seperate networks for routing to work. Leave the main office as is and on the wan use 192.168.128.1 subnet mask 255.255.255.0 , also you need a defalt address on the wan side 0.0.0.0 mask 0.0.0.0 192.168.128.1 (defalt gateway) . The wan side should be able to connect to the internet...
The lmhosts file is cashed in your computer, check the entries are correct for your lan, they should be the same on all computers, go to a dos box type nbtstat -R, this will reload the cashe, type nbtstat -c, to view the cashe and verify it is correct on all computers.
If modems are in dumb mode use serial connect between two comp as your modem type, dont use dialup server at all.Use routing and remote access (RRAS) Be SURE speed on modems and serial ports match,
I dont know of a pci based card most are external but I know they have to be set to dumb mode and leased line, this is 2 wire voice circuit. You have to look at your modem specs closely because some will list the command to do this but they will not work. Look for external business type modem...
Is there a file that can upgrade to the latest release, I have winspm and 800 gs ls id card ? I have caller id working on 801 but will not come in on any other line, it does on an id box, maybe upgrade will fix?
I have the same problem, it seems the signal sent with callerid info needs to be stronger on the legend system than on a callerid box, for this much money go figure. Check for excessive wiring or taps on the incoming co lines that may reduce the signal.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.