Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Kapfel

    New Lab

    Thanks for the Replies. 2600 does seem to be the perferred router of choice here. Guess it's time to shop.
  2. Kapfel

    New Lab

    I'm looking into replacing my lab equipment (4000x6 running 12.1)with newer equipment and have been eyeing the 2600 and 1700 series routers. Anyone have any preference and why? Thanks in advance. Keith
  3. Kapfel

    Traffic not following static NAT Routes

    X.X.X.7 is your inside address and X.X.X.58 is your global address correct? If you remove the port assignments and lets say remove the deny statements from the acces-list does it translate at all or still doesnt work? try keeping the nat config simple to start with then add the complexity once...
  4. Kapfel

    Traffic not following static NAT Routes

    what does access-list 151 look like?
  5. Kapfel

    ADSL Over Frame Relay

    sorry forgot one thing each sub interface should define point to point....example int s1/0.111 point-to-point
  6. Kapfel

    ADSL Over Frame Relay

    On the Californa Router int s1/0 encap frame-relay int s1/0.111(Local-DLCI#) ip address 192.168.1.1 255.255.255.252 frame-relay interface-dlci 111(local-DLCI#) int s1/0.112(Local-DLCI#) ip address 192.168.1.5 255.255.255.252 frame-relay interface-dlci 112(local-DLCI#) int...
  7. Kapfel

    STP algorithm question

    Thanks for the reply Vipergg. I actually didn't state my question correctly. The question is does the spanning-tree algorithm actually run everytime the link changes state when portfast is enabled on the link? Thanks
  8. Kapfel

    Benefits of Layer 3

    - you should gain speed due to the 3750 performing CEF which uses two forwarding tables, FIB (reformatted route table as well as host routes /32 mask) and Adjanceny (arp table) to forward packets at hardware speeds. - Not sure/don't see how you would gain addtional security. - only way i see...
  9. Kapfel

    STP algorithm question

    Portfast puts an access port in which it is configured on directly into forwarding state. In addition loop detection is still in operation and TCN BPDUs aren't sent if the interface goes up or down. So my question is does the spanning-tree algorithm actually run everytime the link changes...

Part and Inventory Search

Back
Top