Search results for query: *

Well, I have a watchgaurd firebox700 and I am trying to change the IP address for one of my VPN connections. It is currently pointing at 192.168.56.1 and I want to change it to point to 192.168.57.1. Unfortunately I am new to these boxes and I can not find where to set this up. I would rather...

I thought that as well....I forgot to mention that all he is using is dummy terminals [no NIC installed]. as I did mention, when his equipment is not on it then the connection remains steady. I can hear the DSLAM at the bridge location clear as day. I tried to change ports on the DSLAM and it...

Okay, Here it goes. I have a DSL conection that is steady when I have 1 PC connected to run its tests. When the customer hooks up his network equipment [Not really sure what he is using] it kills the connection causing it to bounce about every 2 minutes or so. It is a CE150 Copper Mountain...

I would recommend SDSL, however, I would also recommend you use a highrer bandwidth rather than 128 for 30 people. 128 is no more than two 64k lines. So just imagine 30 people working on 2 phone lines at the same time.. :) I would recommend 320K (depending on what everyone uses the...

Given my experience with the Storm ports they are self adjusting speeds. Any other words if you max your load on the Storm port it will adjust its speed to accomodate your needs. I don't really like a Storme port unless I am going to use it one something that maintains a major load constantly...

I have to agree...I wouldn't recommend using stranded on a punch block. Stranded is good because of the flexibility, but I would recommend solid when you are running cables...especially to a punch block.

I am working on a project dealing with IMUX bundles. I am trying to get 4 ports bonded and need some help with the configs. Is it possible to bond 4 ports and get 6MB from the CE150 using a Cisco router on the CPE end? Does anyone have any recommendations? Thanks.