Search results for query: *

I'm have problem getting win98 and win95 to see each other over a direct cross over cable which always worked before. Both NICs are 16bit SMC ISA cards. I downloaded a NIC diagnostic program which indicates that the NICs are working correctly and can communicate over the crossover cable but when...

Thanx Dinosnake I have windows 98 it still starts dialling and when it asks for the user name it hangs up and i've checked the device manager and there are no conflicts. If i try my old 33,6 on the same port it connects successfully. But i didn't mention last time is that my isp uses a software...

I was given a conexant 56k modem but i think its network locked because when a dial up to my ISP it works fine and then hang up at the authentication my ols 33,6 modem dials up and connects to my ISP with no problems. Is there a way to configure it to run with my isp or could a flash it so it...

I Have three 16 Meg SIMMS and one 32 Meg SIMM this should add up to 80 Megs of ram but when I bootup it counts the ram as being 65 megs. I have a P133 is it possible that the 32 and 16 SIMMs are not compatible because my OS also reads the ram as 65Mb

I have two display adaptors in my pc the first is an ATI Rage 2 and the second is a Cirrus Logic PCI. When I load windows 98 only the ATI [pc3] display adaptor works. When I check the device manager it tells me the Cirrus Logic driver won't work with multi screen support is there a way i can...

thanx guys but i've had my cable tested and it works perfectly and both machines can ping then selves even with the cable disconnected. Both NICs display a green led when i plug the cable in. When i try to ping the other machine the orange led flashes but the is no response. Would it just be...

I have two windows 98 first edition PCs linked directly using a x-over cable. They have been working perfectly all the time and they no longer connect to each other. I can ping each PCs network adaptor from its self but can't ping machine one from machine two or the other way round. My friend...

I've got two PCs both running win98 1st edition. They are both using SMC network adaptors and a cross over cable linking them. I'm using Client for MS Networks,IPX,TCI/IP and Netbeui. I set IP address for each 192.168.0.1 for the first PC and 192.168.0.2 for the second PC both have the same...