Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. trojan2003

    Persistent ISDN Connection

    hi rcasta, the router was configured by the vendor. If i set the "no keepalive", will that force the dialer to dial when the line was drop? What I understand from the vendor was that it will keep the ISDN connection alive and will not timeout and disconnect. The setup of this network...
  2. trojan2003

    the new virus and growing packet stream

    Check Symantec website (www.sarc.com) for tools to scan recent worm, W32.MSBlaster and W32.Welchia. If u are looking at blocking the worm on your network, visit Cisco site for some solution. http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801b143a.shtml Best...
  3. trojan2003

    Persistent ISDN Connection

    Thanks jimmyzz for the link. Getting my regional office IT to check with their vendors. Thanks to all those that responded. Cheers.
  4. trojan2003

    Persistent ISDN Connection

    This is what i have in my config. dialer-list 1 protocol ip permit
  5. trojan2003

    Persistent ISDN Connection

    My remote office is using a Cisco 2610 router and a 128kbps ISDN connection. I would like to know how to configure the router such that it will persistently dialup to the ISP. Currently the router does not dial out immediately if the line is drop. Only after performing a ping from the router...

Part and Inventory Search

Back
Top