Search results for query: *

Thanks cabraun and Dave. However, I didnt find any esx installation so i guess its actually installed on sd card. I also see that that my first post is a bit wrong. We have this problem when the affected esx loses contact with our Fibre Channel SAN. Not when it loses contact with our IP SAN as...

We have a couple of esxi's in a cluster running from local sd cards. One of them behaves a bit strange when it loses contact with our ip-SAN. The affected esxi disconnects from the cluster, i can access it by running the vsphere client directly against but the status of the vm's is grayed out...

I solved it myself! :) It's been some 3 years sense the last time I used EMG. It seems that the "PBX Feedback" windows is on by default, however its minimized so one has to "restore down" the System Information window to see it. Im pretty sure it wasnt like this in earlier versions? Our...

Hello! Anyone who might know why "Feedback Window" under Windows is grayed out? And if so how to ungray it? Regards! // dodeesos

Hi! Does anyone know the solution for the issue in the subject? We have done a restart of our fw, and now it wont start the firewall. cpstart give this errormessage in the subject when trying to load the policy. Any Ideas?

Hi! Lately we have had problem with our internet connection. Some of our office users have discovered Spotify.... I'm a big fan of Spotify my self but we need ensure bandwidth for more mission critical trafic during office hours. At the same time we provide a couple of youth clubs with internet...

Hi! I am trying to figure out if its possible to give an user write rights to change a single attribute in our AD (2000) via LDAP (and only read on all other attributes)? We have a setup where our AD feeds our pbx-db with email addresses via LDAP. We would like to feed the AD with extension...

I havent called Tyco , however I've contacted the person who leed the project to install the network some 15 years ago. He has changed employer two times sence then, I was in high school at the time. :) He was able to get me in contact with a technican who might be able to help us. We will get...

The problem is the baluns" & "What happens if you disconnect for balun from the type 1 and leave the cat5 connected?" I have tested with two baluns connected directly (no type 1) to each other and I still get RFI. So you are right, the problem is the baluns. As it seems the network speed also...

The "troubleshooting" have been walkin around with a hand scanner (police radio scanner). The RFI sounds like a high pitch tone, so it is quite simple to hear it. When I disconnect all cat5e cables from their baluns the interference stops... I only picked 100 MHz because its a round figure and...

Hi! One of the networks I manage we have problems with RFI (radio interference). As it seems our network generates RFI around for example 100 Mhz. We dont have problems with the network traffic it self, but a nearby police station complains about interference in their cars when they pass our...

Hi! I need help on configuring an 3550(WS-C3550-24) to prioritize traffic based on cos value. Traffic with cos value 5 or higher should have precedence regardless of interface, vlan och port...

Ok! Thanks for all your help. Regards! // dodeesos

I have a followup question. When reading the documentation from our ISP it seems like we can choose 802.1p as discussed above or to use "IP Pres./DSCP", or both. Anyone who knows how to tag traffic with IP Pres/DSCP value in IOS. // dodeesos

Ok Thanks! // dodeesos

Hi Andy! Thanks for the fast reply. I'm kind of to this QoS-stuff so bare with me..:) I guess I'm most interested in the second alternative in your reply. Mainly because I figured it would be the easiest, and that I only have a 3550 on one side of the ISP network (we also need to tag the...

Hi! I have a question regarding Qos and 802.1p tagging. I have the following setup: Node A | (Access port) Cisco 2950 (SI) | (Trunk) Cisco 3550 (EI) | (Trunk) ISP Network | (Trunk) Cisco 29x0 | (Access port) Node B Our ISP provides Qos in their network. In order to take benefit of this...