You have not said what subnet mask is being used.
Looking at the config I guess its 24 bits, 255.255.255.0.
Check this is configured correctly on all devices and that your PC default gateway is set to 10.0.1.1.
Once the packet hits the router a ping should work ok, as this network 10.0.0.0 is...
802.11b is based around 2.4Ghz
802.11g is based around 5Ghz.
Cisco uses a RP-TNC connector (Reverse-Polarity Threaded Naval Connector.)
You will need to check documentation on the new kit to see if compatible.
The Cisco antenna / dish are different part numbers depending on whether they are...
Hello,
My experience is only with Cisco products. See www.cisco.com for lots of info - no need to have an account.
1) I believe in the UK there are 13 channels ... However, to avoid interference you can only use 4 simultaneously.
2) The channel can be set manually or can be set to search for...
Hi,
From the console you should see what you are typing.
Obviously in Rommon there are only a few commands you can actually enter.
If nothing is being echoed back check your hyperterminal settings.
Hello again,
The debug o/p is a bit odd - the refid shows as 0.0.0.0 - should be the SNTP server address.
Also, the years seem strange.
Router is March 1993,
Server is December 2002,
The timestamps : ref, org and rec all show Jan 1990 !!!!!
I would try manually setting the clock.
Could it be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.