Search results for query: *

Hi All, I have the following environment: P5 570 and a fastT 4300. I have set-up 4 LUN's on the fastT 4300 each of 20Gb. I have allocated the HBA, ethernet card and CD drive to a logical partition. When I boot from the OS cd 5.2 & 5.3 I can see the disks but they are not bootable. Could...

Hi RodKnowiton, Thanks for your response I will chjeckout sudo and the smit menus.

Hi All, I am trying to allow operators to run certain smit menus and use the entries in ssaraid just to view and not change anything. I need them to be able to check RAID arrays settings using the menu options under smit ssaraid. I think this is possible using the smitacl.user and...

Hi, I am encountering the same problem did you ever fix this problem? theram.

Hi All, This is my first time using this forum so please treat me gently. I am trying to write a script to use PgUp & PgDn keys. I am using AIX version 4.3.3. Anyone out there give me some guidence please. Thanks in advance. theramster

Hi All, I'm hoping someone out there can help out. I am trying to transfer data from: C10 - Micro Channel Hardware to F50 - PCI Hardware. I have booted from the O.S c.d so that when the restore takes place all the required device drivers are loaded from the c.d rather than the mksysb. The...

Hi All, I have an error message appearing on boot up and at other times. The error message is :- Bell Mail: lockf (/usr/spool/mail/root) Permission denied. Could anybody shed any light on this please.

Hi Alexhu, Thanks for the prompt response. One other question do I need a x-windows client to upgrade to 9i or can I do it from the command line?

Can someone help me and let me know if Oracle 9i works on AIX version 4.3.3?

Hi jwtesch, Tried the HP Direct driver and changed the qconfig to point at port 7374 ( Didn't work ).... So is what I'm trying to achieve possible via filters ?

Hi, I need to set-up an aix print queue to send prints to an NT box. The NT box is running something called streamserve. This application listens on port 4374. I need to set-up a remote print queue, but I only have the remote servers ip address, port number and there is no remote queue name...

Hi, I am trying to use SYSTEM V printing onto an IBM network printer 17 (4317). I am trying to use PCL commands to change to landscape and be able to switch bins. I need to know how to add a filter to send the the PCL commands and what what the lp command would look like e.g parameters I...

Hi Aixmurderer, I have tried what you suggested but with SYSTEMV printing running you don't get the options. It doesn't even find the print queues I setup using the lpadmin & lpsystem commands. If you have any more advise it would be appreciated.

Hi Aixmurderer, Thanks for your reply. I will try this and get back to you if I have any more questions.

Hi All, Thanks very much to everyone for your response..:-) This will help me out. theram

Hi aixmurderer, Thanks for your reply. These printers are ip printers ( IBM 4320's ). Do you need to have any special settings on the print queue so each queue knows it's print port or land? How did you set up the print queues using system V printing?

Hi, I am trying to use 1 printer to switch between landscape and portrait. Does anyone know how to achieve this?

Hi, I need to be able to change a users passwd using a script or program. Is it possible to redirect the input from keyboard to a file so there is no need for the user to sit and type in there own password?

Hi Gary, I am using the following with my script:- tapeutil -f /dev/rmt1 mount $vg_slot >> $log 2>&1 savevg -i -f /dev/rmt1 $vg >> $log 2>&1 The question I am asking is: Can I put more than one slot in the tapeutil command? e.g. tapeutil -f /dev/rmt1 mount $vg_slot,$vg2_slot >> $log 2>&1...

Hi, I have an IBM 3570 Magstar tape library. I have a vg that I am backing up using savevg. The backup is running over to 2 tapes and is failing because my script allocates 1 tape. Is it possible to allocate 2 tapes using the tapeutil command so the backup will automatically load the 2nd tape...