Search results for query: *

Thanks dwalin! I checked and there was no entry for either the primary or the secondary. I added the board for the primary and will monitor the results. Thanks Again!

Thanks telemanret. We have made sure that the voice ports are ISI and we did all the audits. We'll try to reboot the system when the client allows us to. Thanks again!

We replaced a Definity Audix R3.2 recently and now message lamps are not lit or extinguished in a timely manner. The LED doesn't light up right away when a message is left and the LED is not turned off after the user retrieves all the messages. Audix is generating the following error message...

Customer is a law firm that routinely receives long faxes (i.e. 20 or more pages). When going thru the G3s system's analog port out to Time Warner PRI circuits, faxes are getting cut off or getting garbled after about 15 pages or so. Has anyone experienced this sort of problem before and how...

jneiberger: I'm not sure how "new" this is. The client currently has that service from a T1 into the frame relay circuit on the home office side and adsl service back into the frame relay circuit from the branches. Only difference is that now instead of just the dsl modems, we're going to be...

Thanks Kapfel. Appreciate the assistance!

Mark, What you probably can use is Cisco's NBAR feature. See the following link for more info: http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080094ac5.shtml stanpci

I’m installing (3) 1801 routers each with a 1-port ADSL WIC in 3 branch offices. They’re going to be connected to the home office over a frame relay circuit. The home office will be using a 2801 router that connects to the frame relay cloud via a T1 serial interface tying in to each of the...