Search results for query: *

I have a 406 (3.254) with a PRI T1, and I have two trunk groups set up in the 406 for the PRI. What is the best way to setup dial 9 outside dialing. When I set it up all calls go out one trunk group.

I have a 406 v2 with 5420 and 5410 sets with a PRI T1 and DID Numbers. When a DID call is ringing in no one can dial out. When you dial 9 nothing happens, and when you hit the speaker button or pick up the hand set you have picked up the incoming call. This is happening with their main number...

When you pick up the handset or hit the speaker button. You get the incoming call instead of the receptions.

Thanks!! It was the T1 Board giving me Quad BRI trunk problems. I reseated the board and the networking problems went away.

I just upgrade a 406 v2 from 3.2(17) to 3.2(54) for voice mail issues. Now if a call is ring into the receptions, and a system phone trys to dial out. When you hit 9 nothing happens. You have to wait for the call to be answered by the receptions. Then dialing 9 you get and outside line. I have...

I went back through both systems ip routes, and nothing had changed.

1.) I have rebooted both systems. The voice networking is set to yes. I can ping both IP Offices. I do not have any errors in manager. 2.) The 3.254 was recommended by tech support. 3.) I am using monitor and I am not seeing a problem.

I upgraded a 406 v2 and a small edition IP Office to 3.254 to correct some voicemail issues. Now we cannot call between the systems. When you dial the ext # to other switch. I get a number busy in display and a fast busy. You can see who is on the phones at the other switch. This all worked...

I know that you can do this, but I was told that there was a way with short codes. I have a IP Customer that this is an issue, and wants one button with BLF and Auto Intercom per ext. Does any one know a short code to do this? Thanks

I need to program 54XX phones and eu24 buttons for BLF with Auto Intercom for exts. Can this be done on a 406 v2 with 3,217 software?

Is there a way to program a button on a 54xx phone and eu24 for BLF with auto intercom to and ext.