I tried manually creating the VLAN's in the switch and that didn't work either. Maybe I did something wrong. I'll play around with it some more. Thanks for the help guys.
I've looked through the entire web configuration utility of the Linksys and I see no place to set the VTP domain. The Linksys doesn't do CDP so I can't check that. And as far as pinging goes I've tried to ping the Linksys switch from the Catalyst and it didn't work but the IP address of the...
I recently purchased a Linksys SRW2024 switch. I am trying to connect the switch to a Cisco Catalyst 4000. I have set the GBIC port's connecting both switches to trunk mode. But, I still can't access the vlan's available to me on the Cisco switch. The VLAN's on the Catalyst are distributed...
Here is my situation, I am trying to setup a gateway to gateway VPN using L2TP/IPSec with EAP/TLS certificate authentication using this guide, http://www.isaserver.org/tutorials/g2geapcertauthpart1.html, by Tom Shinder. I have followed the guide pretty much to the T. Everything seems to have...
Thanks for the suggestions guys. I figured out what the problem was though. The 2nd harddrive in my RAID 1 set seemed to me causing the hang up. Once removed the system booted fine. I didn't notice that the HD lights for the two drives were stuck solid until I pulled the front cover off. Thank...
The situation:
Took 1 of 4 DC's on my domain and demoted it from a DC to a member server. Went back to the other DC installed terminal services remote administrator mode and restarted. Now that DC hangs during the 2nd starting up windows screen about 3/4 of the way. Tired booting into safe...
Well this past weekend I took the jump and upgraded my domain controller to Windows Server 2003. No major problems...except for one with DHCP. For some reason the DHCP service no longer wants to bind to any network cards in the machine. Initally it wouldn't bind to the built in network card...
OK so here is a wierd printer issue I'm having on one of my print servers. The server is running Windows 2000 server. It also doubles as a DHCP server. There is no other software except McCafee netshield. The server was running fine till about a few days ago. When it suddenly seemed to loose all...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.