Search results for query: *

Hi, I would like to create a Branch Office Tunnel between a NVR1100 and a BSR222. The NVR1100 has been discontinued but I thought it might still be available to create that BOT. On the side of the NVR1100 I have a Static public ip. The NVR1100 I would like to use as a responder. On the side of...

Will do...Thanks.

Hi, I would like to create a Branch Office Tunnel between a NVR1100 and a BSR222. The NVR1100 has been discontinued but I thought it might still be available to create that BOT. On the side of the NVR1100 I have a Static public ip. The NVR1100 I would like to use as a responder. On the side of...

Hi, I have a BSR222 at HQ configured to terminate ABOT tunnels coming from a remote location. This works fine. When I enable and configure the BSR222 at HQ to terminate user tunnels, the ABOT is not working anymore. Does anyone know if the BSR222 can support both ABOT's and user tunnels...

Hi HungryHouse, I tried everything showed in the document but still can't get it working. I replaced the AT initial string with one that should work with the modem. One thing I noticed is that the BSR222 sends out an ATH command which I think is wrong. And I am not able to change this anywhere...

Hi, I am in the process of implementing a Nortel BSR router and would like to configure the backup feature included with it. This will be usefull if the primary WAN link goes down. I see that I need to connect the BSR222 to an external modem which I have already done, but I am stuck at the...

tried with the D option. Connected a ethernet cable to a laptop. Installed a TFTP server on the laptop and placed the image on the TFTP server, but the switch can't download the file. I think that's just because the switch is not working and none of the ports are. Switch doesn't have a seperate...

Curtismo, Here is what I get when pressing S: ********************************************** Press 'a' to run Agent code Press 'd' to Download agent code Press 'e' to display Errors Press 'i' to Initialize config flash Press 'p' to run POST tests Press 'r' to Reset Press 's' to display...

see below what happens when selecting 2: Press 'a' to run Agent code Press 'd' to Download agent code Press 'e' to display Errors Press 'i' to Initialize config flash Press 'p' to run POST tests Press 'r' to Reset Press 's' to display System information Erase Flash: 1 - Config-1 2...

Hi DaddyOfThree, Thanks for your prompt response. I tried pressing the i command and get the following: *********** Erase Flash: 1 - Config-1 2 - Config-2 3 - Config Selector-2 Select [ <config-1> ]: Erase Flash? y/N [ N ]: n Press 'a' to run Agent code Press 'd' to Download agent code...

Hi, I have a Nortel BES 1010-48T switch here that will not boot. It does power up and all the fans are running. None of the lights in the front for the ethernet port are blinking. I tried to ping the switch on it's given IP adress but no response. I connected to the switch via serial and this is...

Hi, I am in the process of configuring some new Nortel BES1010 switches. I use both BEM and IE to manage the switch. I want to uplink the switches with fiber to another switch at another location but I am unsucessful in doing that. I use SX GBICs on the switches. I thought that maybe those ports...

Thanks DaddyOfThree. So I think the router to go with is the ERS 5500. Do you know what happened with the passport 1600 series? It's not being showed in the ERS portfolio: http://products.nortel.com/go/product_content.jsp?segId=0&parId=0&prod_id=29580&locale=en-US Is it MD?

Thanks for your reply DaddyOfThree. You mentioned IP Routing. Which entry or feature in the Q4 2007 feature list specifies that? I would like to figure out what entry level L3 switch from Nortel to select.

Hi, Is the ERS2500 series switch a real router? (L3 switch?). I want to route traffic between 5 subnets and looking for the smallest Nortel router that would be able to do the job. Thanks in advance.

Is there anyone out ther who can help?

Hi, We have set up a DMZ for one of our customers. I used a NVR600 and an ISA sever 2004 to set up this solution. A schematic overview should look like this: Internet -> NVR600 -> DMZ -> LAN. On the external side of the DMZ we have an NVR600 with 3 interfaces. 2 of those intefaces are public...

This router has 3 interfaces. 1 connected to a WAN (ISP) 1 connected to a DMZ and 1 connected to the LAN. The webserver is in the DMZ. There is a NAT rule configured that listenes on the WAN iterface for https traffic and forwards that via a port forwarding rule to the webserver in the DMZ. Yes...

In the picture in the following URL: http://rachiano.spaces.live.com/photos/cns!A0A22B2234F5F195!262/ You can see the private address of the NVR1100 (10.10.10.133) and the interface address of the webserver (10.10.10.113). The request actually came from a client with a public address. Wireshark...

Packets on the webserver interface show to have as source the private interface address of the router. That is what I don't want. I want the source address to be the exact internet client address. I know for example in ISA server 2004 that you have the option to let ISA server replace the source...