Search results for query: *

Contacted Vadim Burtyansky through his program, but in his reply he suggested, that Windows XP doesn't need his solution, My Computer-->Manage-->Disc Management would do the job. But...XP does not allow the change of the system disc. Period... Apparently the references are the problems. So any...

I wonder if there is a Windows XP (Home) supported version of this apparently great program.

Thanks fellows; Problem is solved. I had some incompatibilities between my old Roland and the new audio card. Used an other driver.

bcastner, thank you for the warning

I downloaded Sonar trial and still could not get any sound. Since this controller wasn't used for years, is there any way to check if it is defective? I located the IN connector on the Soundblaster Live! game port, so I feel confident that the hardware connection is correct. Since there was no...

Thanks fellows. Installed ServicePack 1 and Maxtor excepted it and I was able to install the full 160 GB with it's Maxblast so I didn't need the Maxtor's 133ATA card. So the problem is solved and thank you again.

kiddpete: I did, this was the first thing I checked.

Thanks for such a prompt reply fellows; The issue here is not speed but the 160 GB. The Dell's mobo based IDE supports only 133 GB (is it Windows XP limit?) so I could not use the Maxtor to it's full capacity. Another question: Could I possibly replace the soundcard with a quality AGP slot...

Thanks CDLVJ for reply Soundblaster SB live! has a Midi port with the 16 pin connector split into two 5 pin round connectors but i don't know which is in or out they are not marked. Tried both they don't seemto be active. I can play MIDI files well, I have an old Turtle Beach Sequencer, I like...

To install a 160 GB Maxtor HD I need to install its ATA/133 PCI card. But my only PCI slot is used by the Soundblaster Live! soundcard. Any advise? Dell Dimension 8200 1.7 Ghz 256 RAM Windows XP Home.

I got a Roland PC-200 MK II MIDI keyboard controller. The out plug (5 pin round) connects to the Joystick/MIDI connector on the Soundblaster Live! I still can not get a sound. The Roland manual doesn't say a word how to operate it with the PC to create sound. Any advise? Thanks. Note: If this is...

Thanks fellows. bcastner's referenhce to the article gave me all the info, but it quotes: "many MS_DOS based and Windows based programs make references to a specific drive letter, if modified, these programs may not function properly" This was what I was afraid of since I am using...

I have 2 HHD-s, a 30 GB and an 80 GB as well as a CD-ROM and DVD burner. They were originally set up with a very awkward drive lettering (don't ask me why and how - I don't know) a: floppy 3 1/2" c: 30 GB HD used as a slave for data only (video clips) Mod # ST330630A, NTFS single...

Loosing data with RAID 0 striped for video editing is not a big issue, since I can always recapture them - either from the VHS tapes or the camcorder tapes. Broadcast is not my bag. I decided to get the Maxtor 160 GB drive since it provides also the card, but I don't think it supports RAID so...

Thank you fellows. Goldenchild: I do use now two HDDs, the first of 80 GB has ALL my programs, OS etc and the second: 30 GB is dedicated to the videoclips only. This is the one I would like to replace with a 160 GB new drive ( AVI files take a tremendous space - over a GB/min.) I found the best...

Goldenchild, your info was greatly appreciated. I was actually eyeing the Maxtor 160 GB 7200 drive with 8 MB cache you recommend at Costco for $ 129 and the box claims that it includes a PCI card for the drive. Apparently it is to overcome the 137 GB limitation. This also answers my previous...

Thanks fellows; It seems I will just stick with my DMA 100, but might replace my 30 GB drive with a larger one. So I can simply swap the drives. Am I right?

What is the difference between an Ultra DMA 100 and 133 hard drive? Speed? If so, how much? Can I replace a DMA 100 hard drive with a DMA 133 or do I have to replace the IDE controller card too? If so, how cost effective is the change? (I am working with large video files where...

I have and use 2 printers, HP Laserjet 4L (parallel port) for b/w and Canon for color (USB). Turning Canon on and starting Canon Status Monitor it goes properly into Idle. But I can not print with Canon. Windows XP Home: Control Panel - Printers (right click), Canon Printer is offline. Use...