Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. s36e175

    TSM Disk-To-Disk Backup

    There are lots of ways of doing this, using IBM FlashCopy or just using TSM, or a combination of the two. You haven't provided enough detail for me to be more specific, but that should give you a start. Talk to your TSM supplier. Regards.
  2. s36e175

    TSM 5.4 available

    Check out the IBM Tivoli Storage Manager Version 5.4 Deployment Guide. http://www.redbooks.ibm.com/redpieces/abstracts/sg247379.html
  3. s36e175

    DS4300 Performance Issues

    See what performance you get when remote mirroring is turned off. Write cache is designed to buffer small random writes. If you do sequential writes the cache will flood and will actually slow it down. I think v9.16 of the Storage Manager code might auto-tune the cache management? but you can...
  4. s36e175

    IBM DS 300 SAN / Performance Problems on Virtual Server 2005

    Hi, DS300 is a very slow system. IBM has now withdrawn this model (and the DS400) after only 12 months in the field. They have been replaced with the *much* faster DS3000 but the iSCSI model (DS3300 won't be available until June). I have been involved in a a couple of DS300 situations and...
  5. s36e175

    Operational impact of disk firmware u/g

    Hi, on a DMX800, can disk firmware be upgarded on a RAID set by RAID set basis, or does the whole DMX800 need to take an outage? (Not talking about controller firmware). Thanks.
  6. s36e175

    FastT200 Expanding Existing Logical Drive

    Yes DCE (Dynamic Capacity Expansion) which is expansion of the RAID array, and DVE (Dynamic Voluem Expansion) are both supported in v8 of Storage Manager. Definitely worth considering creating a second array however, if the host OS has some sort of LVM support. :) jim
  7. s36e175

    CHANGING RAID -5 TO RAID -10 ON FAStT

    Sorry, I didn't check back so didn't realise you'd asked more questions. I presume you have it all sorted by now anyway. Rgds, Jim
  8. s36e175

    CHANGING RAID -5 TO RAID -10 ON FAStT

    I think it depends on the version of IBM FAST Storage Manager that you are running. v7 didn't allow dynamic reconfig, but v8 does. I think you can download v8.3 at no charge from the ibm website. Rgds, Jim
  9. s36e175

    Fox Pro Executable

    SCREEN=OFF in config.fpw was indeed the problem. All fixed now. Thanks, Jim
  10. s36e175

    ex dBASE IV programmer asks about VFP8

    OK, I took the VFP8 plunge, and found the app kind of ran, but looked ugly and some bits still didn't work (format files). But I have realised the whole thing can be made into a very simple app by redesigning with VFP8, and so far it's been much more pleasant than my MS Access experiences. I...
  11. s36e175

    Fox Pro Executable

    I have added READ EVENTS as described, but the problem persists. i.e. I can run this as an app, I can run it as an exe (run after build) from within VFP8, but if I try to run it as an executable outside of VFP8 it flashes past and terminates. My main is wofstart.prg SET DATE TO british DO...
  12. s36e175

    APPEND goes into infinite loop VFP8

    It was in the format file. I have decided to rebuild the app in VFP8 rather than try to keep putting lipstick on a DBASEIV bulldog. Regards, Jim
  13. s36e175

    Fox Pro Executable

    Pesteo - I am getting the same symptom - did you resolve this, I am keen to leverage your experience before I start trying stuff myself. Thanks, Jim
  14. s36e175

    APPEND goes into infinite loop VFP8

    I'm new to VFP. I have a DBASEIV app which I have just tried to run under VFP8. The program contains a code sequence as follows. When it hits APPEND, VFP seems to go into an infinite loop of appending records to the table. I was expecting it to APPEND a single record and open an edit screen. I...
  15. s36e175

    dBase-IV on W2K-PRO

    My own experience of trying to move from DBASE IV to dBASE 5 is that it's not at all straight forward. If you have Say/Get code in your dBASE IV you may be better off moving to Visual FoxPro.
  16. s36e175

    ex dBASE IV programmer asks about VFP8

    Hi, can anyone confirm for me VFP will provide a painless dBASEIV conversion? (Visual dBase does not!). Years ago I built an app for my father-in-law in DBASE IV. I haven't programmed in anger for years but he still uses it to run his quite substantial business. I bought Visual dBase 5.5/6/7...

Part and Inventory Search

Back
Top