Search results for query: *

I would start by reading that CCNA book. [2thumbsup]

If you just want to monitor traffic utilisation and not breakdown to source/destination/protocol types etc then Multi Router Traffic Grapher (mrtg) will do the job.

Have you got a link to the list of CCIE's

The enable password is there for backword compatibility and is not usually needed. The enable secret is encrypted but the password can still be broken using readily available tools on the internet. Use "no enable password" to remove it and use service password-encryption to encrypt...

Sybex do the BCSI CCNP/CCIP book which very good books.

I have been self studying the CCNP 2.0 and have all 4 of the Sybex guides. How much has changed in the CCNP 3.0 and what are the best books to but for self study. There don't seeem to be any CCNP 3.0 Sybex guides available yet. I have read the routing/switching guides for 2.0 and want to get...

Try "no cdp run" on the dialler interface as it sounds like this is bringing the line up.

Sorry but is the router actually booting it's image?

This is not allowed.

ROUTER 1 interface FastEthernet0/0 ip address 172.20.16.2 255.255.0.0 standby 1 ip 172.20.16.1 standby 1 timers 1 2 standby 1 priority 110 preempt standby 1 authentication whatever ROUTER 2 interface FastEthernet0/0 ip address 172.20.16.3 255.255.0.0 standby 1 ip 172.20.16.1 standby...

Yes. just add two routes on your default gateway both with the same admin distance eg. on DG ip route 10.0.0.0 255.0.0.0 192.168.120.1 100 ip route 10.0.0.0 255.0.0.0 192.168.120.2 100 You can also use eigrp and that will do equal cost load balancing for you if you don't specify any static...

Do you have console access?

Does anyone know when they are re-releasing the Sybex study guides by Todd Lammle?

I am going to have to say this - Haven't you thought about Leased Line/FR/MPLS rather than expensive ISDN calls?