Policy Patrol is the answer. If you set a univeral message for all outgoing mail it is WAY cheaper than setting it up per mailbox so read the licensing carefully when purchasing or you could over-pay.
If you have setup yourself as a member of Domain Admins full access to all E-mail boxes then its simply a case of creating a new profile with the user you wish to change and then loading Outlook with that profile and changing it to how U want. You can also check the box to notify the users of...
OK just to blow you out the water:
The addresses you mention are wrong.
My company has NOTHING to do with food.
My domain name is not what you gussed at.
As far as hackers go - anyone can find out a mailserver address using nslookup or mail headers. As for FTP and WWW they are obvious domain...
sorted - many thanks Yizhar.
Inside the Virtual SMTP you can set a smart server - setting this to the internal mail server allowed it to do the hard work not the IIS server.
I have setup the PIX and new 1601 router and I 'thought' everything was working - oh boy was I wrong.
I have a mail relaying problem. My Intranet server has a small form that sends a mail message to the Chef when people order food - so far sounds easy. This Intranet server also acts as the...
You stated in your previous answer that I should remove the following lines:
static (inside,outside) 212.240.1xx.20 10.99.99.3
access-list outside_access_in permit tcp any host 212.240.1xx.20 eq 1723
access-list outside_access_in permit gre any host 212.240.1xx.20
I thought that I would need...
correct me if I am wrong but I thought I would need those lines in order to let through the PPTP (1723) and the GRE on the same IP address to the RAS server. Internal 10.99.99.3 external 212.240.1XX.20 as stated in them lines?
If not what am I meant to do?
I have just been trawling through the forum (why is searching still off?) and I think I need to add an additional mapping to an external IP address that isnt being used for anything else so that GRE can get through. With this set I am presuming that all I have to do is point my external clients...
I am trying to get the PIX to allow me to VPN pass-through to my RAS server on the inside interface. It gets as far as verifying username and password and then times out after about 30 seconds with a 721 not responding error.
I am guessing this is a GRE problem however I have experimented with...
Many thanks to all those who have helped me through these trying times. PIX firewalls are by any means the easiest beasts to conquer but once you get the hang of it they certainly aren't the worse either.
Special thanks to routerman who has answered all my sarcastic questions and even found...
Excellent - it was the gateway addresses all alone! DOH! Thanks for the help I am nearly done. 2 small issues remain:
1) I need to allow my DMZ webserver (192.168.1.2) access to the inside mail server (10.99.99.7) and sql server (10.99.99.12) - How do I go about this? On the old server they...
I think you must be right - I am going to be doing a test tonight (cuz everyone will have gone home!) but instead of changing the gateway I will change the firewall internal address so that it is the same as the current firewall (cureent firewall will be disconnected) then simply reset the...
The gateway on my mail server is set to our other external line - I am guessing that this may be my fault! I will test this today and get back.
Could I just add it to the gateway list on the mail server or will it have to go in as the primary field?
OK I tried opening up ICMP but no joy it appears as though it doesnt know that it should have 'adopted' 23 as its external address also. Should we be able to ping it? Here is my config now.
PIX Version 6.1(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif...
Well I have tried some ping testing - cannot ping 212.240.1XX.23 at all but can only ping the interface. I have also been on the router and it appears as though the static rule is working as both the 212.240.1XX.18 (interface) and the 212.240.1XX.23 (internal mail server) are appearing the in...
OK I can ping inside to the mailserver fine and I can ping outside (although not the router cuz it has ICMP turned off to hide it) it all appears fine except it doesnt work.
Next question is how do I use the console to check for errors I have never used this feature and I am unsure how to...
The thing I dont understand is that I cannot ping the other addresses that should be using the outside interface i.e 212.240.1XX.19 - 23 - 22 - 21 etc etc. The only address I can ping is the 18 address (the interface address) is this normal? On our unix box U can just add an alias to the...
I have amended my configuration just in an attempt to get the SMTP working and trying to telnet into port 25. Here is the config as it stands but I am still unable to connect. I am beginning to think this thing is cursed! I am pretty sure its not the router causing the issue as when I plug in...
I think the problem must be something to do with my translation settings. I am have been looking through the settings on my PDM and the following error comes up when looking at my internal network interface NAT settings:
This dynamic translation rule is overlapping with static port redirection...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.