We have two call queues on different VLANs, and both groups have reported dropped calls. It does seem completely random. Although some users do not report trouble, I think it is because they can't be bothered. I should probably make sure of that. The users who do report are pretty...
Network tests prior to installation of the new phone system did not indicate we needed QOS, so we are not using QOS. We have about 230 users. The network is split into ten VLANs, two for servers and eight for users. IP Office System Status has occasionally listed Call Quality of Service...
We have the clock quality set to network on the PRI with the highest use. On the others it is set to fallback or unsuitable. We are using mostly 9611 IP phones and some 4620 IP phones. We expect to have some calls dropped due to spotty cellular service, but some of the dropped calls are from...
We installed a new IP Office 9 system in September. Since then, we've had complaints about static, crosstalk and dropped calls. Usually, the complaint is that the call was dropped. Sometimes the dropped call is accompanied by static or crosstalk or both. Complaints average about 1 call in...
We've had a new IP Office 9 system with a separate Voicemail Pro server for a few months now. Some users left the company, so we changed the name on their extensions to "available". When new users came along, we changed the names on the extensions to the new user names. The problem is that...
TomMills - Did you have to purchase a second site license from Xima in order to monitor the trunks? That's what their support is telling me. Seems odd, since we only have one site. Thanks.
Xima told me to enable TFTP Read to allow Xima Chronicall to report trunk information. I did enable it, but still no trunk info in Chronicall. Any Xima gurus out there?
I need to enable TFTP Configuration Read in IP Office 9. I found the checkbox under Unsecured Interfaces in Security Mode, but I don't see any indication whether it is mergeable or requires a reboot. Anyone got a clue? Thanks.
We have a new installation of IP Office v9. We have a few hunt groups set up and our call center supervisors keep a close eye on their Chronicall Reatime Monitor. Today they noticed one agent was receiving new hunt group calls immediately (1.4 to 2 seconds) after she hung up from a previous...
OK, I changed Hunt Group 1 to allow queuing and will wait to see what happens. Shouldn't overflow calls queue in Hunt Group 2 now, even if no agent is available?
After checking logs, it seems there was no one available in Hunt Group 2 to take the call. So I'm wondering if the call should have been queued in Hunt Group 2 instead of ringing busy. Hunt Group 2 does have a queue. Hunt Group 1 does not have a queue. Thanks.
We have a hunt group (1) set up with overflow to another hunt group (2). This works fine when someone is logged into hunt group 1. But when no one is logged into hunt group 1, it rings busy. How can we make it overflow to hunt group 2? Thanks.
I need to find a way for hunt group supervisors to put the hunt group out of service from a remote location. They will use this when the weather is icy and the office is closed. So far I've constructed a short code that can put a hunt group out of service and a Voicemail Pro module to get the...
The boss did not like the idea of the soft console because he was afraid something was more likely to go wrong with the computer than with the phone. If we do put the soft console on the receptionist's computer and the computer crashes, will she be able to continue using the phone to field...
We did try a Dial button with the hunt group number on it, but the receptionist says it is quicker to enter the extension on the keypad than it is to wait for the Dial button to get dial tone and dial the number.
Our vendor advised us to use the BM12 because it can be attached to the phone...
We just ditched our Definity system for a new IP Office 9. We took out the old receptionist/switchboard operator's console and gave her a 9611G with a BM12 attached. How do we program a button on the BM12 so she can use it to transfer calls to a hunt group? The Group button does not seem...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.