Search results for query: *

Hello I have passport 1612G and 6 baystack 420 I created 7 vlans vlan 1 has Ip 192.168.x.x the other vlans are have IP 172.16.x.x each vlan has it's own scope of IP's in one subnet everythings works fine such as each vlan take it's IP from the dhcp server the dns works OK all can access the...

Hello I have one 3com switch 3812 12 port 10/100/1000 Gigabit Ethernet switching as a backbone, and seven (7) 3com switchs 4226T Built-in Gigabit ports used as uplinks, I want to creat vLAN, can I creat he vLAN's in the backbone switch only and connect the other switches to it if so how? if...

Here you go dopehead this is my current configuration I removed the access-list that you mentioned and also tbisset's one PIX Version 6.1(4) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password UbkFu0mKzcASmjyx encrypted passwd UbkFu0mKzcASmjyx encrypted...

Blackbug what I did I created a different access-list for inside and then I applied access-group to it but didn't work after I denied tcp connection to 1836 I added access-list 101 permit ip any any but didn't work this is done before I tried the other solution which is creating a different...

tbissett I added the acces-list as you mentioned still my internet connection goes off dopehead I did what you said but but no effect how can I do it what I did I created a new access-list for inside then I applied it to the interface using access-group but no effect

Thanks to all of you tbissett, thanks for the tip I'll try that Br0ck I agree with dopehead yes you can do it, I don't want my staff (inside) to use ms messenger dopehead I think you are right I have to give different acl to the inside interface I think thats what I missed if this didn't...

Hi everyone the following are access-list in pix firewall 501 and it is working OK access-list 101 permit tcp any host xx.xx.xx.xx eq pop3 access-list 101 permit tcp any host xx.xx.xx.xx eq smtp access-list 101 permit tcp any host xx.xx.xx.xx eq www access-list 101 permit tcp any host...

Thanks guys for your reply's I am new in IP telephony and I dont know how to set it up in router and firewall using VPN, so the VPN setup will be between the cisco routers 2610 and the vLAN setup will be in Nortel switches it sound logic but is there another way without VPN ? Thanks again guys...

I got a problem, I am trying to setup IP telephony between two sites one of the sites has a firewall (main site) how can I set the firewall to let the IP's that belongs to telephoy pass through it I opened the UDP port but it didn't work , also can I use 2 networks one is for data users and the...

Hello All I got a problem, I am trying to setup IP telephony between two sites one of the sites has a firewall (main site) how can I set the firewall to let the IP's that belongs to telephoy pass through it I opened the UDP port but it didn't work , also can I use 2 networks one is for data...

I have checked with my ISP they said the problem is from my side, how can I solve it? help!!!!!!!!!!!

I have the same problem I can send out but if I send from hotmail account I do not recieveit, it bounced, speedracercjr what did you do to made it through? Thanks

Thanks jwi71 for your note it worked what I did I added users group to login localy policy in the domain controller policy I tested with one user , logged in then I removed the users group from the logon locally tested again it worked ok with all users thanks again

After installing PIX firewall 515 when users login to w2k they get a message the "local policy of this system does not permit you to login interactivley" but not the administrators so I checked the local policy all are not defined Does anyone know how to solve this problem and did...

Hello I have a cisco firewall 515 I want a certain IP to be able to ping and telnet etc... how can I do that, I can let everybody do that but not the selected IP your help is appreciated Thanks

I found another of doing that I used the FOR command along with a txt file I transfered the users name first and last and there ID's and there passwords to a txt file then I used the FOR command So all users are created in the exchange server active directory and then I selected all users right...

Thanks zcolton for your reply ok, I have access database that has all students name in it we are going to let the database to generate there passwords randomly, I want to create a mailbox for each students as you know there are a lots of students if I want to create each mailbax manually it'll...

Hello everybody I need help we have access database that all users in it also it generate users ID and passwords and we have exchange server 2000 / advanced server, what I'm looking for is how do I connect the database to the exchange server or to the active direcoty so whenever I add a user in...

Hello everybody I need help we have access database that all users in it also it generate users ID and passwords and we have exchange server 2000, what I'm looking for is how do I connect the database to the exchange server so whenever I add a user in the database and it generates it's user ID...

Thanks guys for your help, once I am done I'll let you know right now I am in preperation period