Hi,
I have a PIX515E, 5.3(2). I applied access-lists to permit only gre
protocol between two stations (one from LAN, one from DMZ int) and it's not
working, but when I allow only ip traffic it's working. There is no NAT from
LAN to DMZ.
The same access-lists I applied on Cisco router and...
Hello,
I am having a problem with "filtered packets" on the switches. I have a 2xMLT UTP between 470-48T and 450-24T. I upgraded the sw and tried another ports, another cables, but situation is the same, a very big amount of filtered packets at ports.
How to solve this problem?
Ivana
I tried SAA, but the problem is following:
track 124 rtr 2 reachability
rtr 2
type echo protocol ipIcmpEcho 216.239.59.104
rtr schedule 2 life forever start-time now
and route-map ivana permit 10
match ip address 3
set ip next-hop verify-availability 216.239.59.104 10 track 124
Problem is...
Hello all,
I would appreciate if anyone can help me on this.. I have a 2811 with two connections to Internet, Frame Relay and ADSL. One part of LAN IP adresses will go via Frame Relay and other via ADSL to Internet. For this, I will use policy-based routing feature. But, the problem is when...
Hello all,
I have a problem at the customer site:
ASN has ethernet module, ISDN BRI module, and E1 module. ISDN BRI is not in use. Software version is 15.5.1.0. About 30 remote locations (Passport 2430) are connecting to this ASN through ISDN lines over E1link (10 channels). This is an old...
Hi,
I have a question about caller or dial-in user calling time; I have a cisco
2610, and want to make the following:
I want that dial-in user on Cisco 2610 can make callin just for example from
8.00am to 4.00pm, so at that period he is allowed to make call to cisco.
Other times of call are not...
Hi,
Does anyone know answers on following questions?
1. What is max aggregate clock rate on ARN router?
2.What is max external clock rate on 3-serial module on ARN?
3.What is max external clock rate on 7-serial module on ARN?
I have 3-Serial Module in ARN router, and can I have COM1 with max...
Hi,
I have ARN router on remote site connected over Frame Relay link to the central location. I want to add PPP link on second serial port to the same central location. Can I configure ECMP (equal cost multi-path) on those PPP and Frame Relay links? It's the same kind of interface, but...
Hi,
I'm having a problem with VPN connection between Netgear FVS318 and
Contivity 1100. It's working fine, but sometimes I have an "invalid cookie
from <FVS address>" message on the Contivity. Like it has discarded its SAs,
but FVS318 still has the old ones, or something like that...
Hello,
when I insert NM-2FE2W module in cisco 3640 I get the following message on the console screen:
*Mar 1 00:00:07.243: %FECPM-3-TDMSW: TDM switch init in slot 2 failed
-Traceback= 602430B0 6023D5E4 60591178 60591268 604F160C 60404228 6040443C 604D91F0 604D91D4
*Mar 1 00:00:07.247...
Hi,
has anyone taken 920-123 BayStack/Business Policy Switch (BPS). Can you
tell me some example questions and what can I expect on that exam, is it
difficult (passing score is 57%). For preparation for exam I've downloaded
manuals,user guides and release notes of BayStack switches, is there...
For example, cisco has static route 0.0.0.0 0.0.0.0 10.0.0.1 (BRI) which is lower priority then rip.(rip is enabled only on ethernet interface) It's getting default route by RIP from another router and that route is active in his routing table, and when it's stops receiving RIP update from...
I have a 1760 cisco router with FXO modul. I'm calling from phone(in PSTN)to IP phone. The thing is when FX0 voice port detects a bysy tone from IP phone, it stays in connected state for a very long period, like 5 minutes, although I hung up. It is obvius that during that time I cannot make...
Hi there,
can anyone tell me which command to use in order to see MAC address of ASN, ARN and Passport 2430? Is there a way I can see it in Site Manager?
Nice regards,
Ivana
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.