Search results for query: *

Does anyone have an example config for an AS5300 where dialup users can get there IP from an external DHCP server on our network. Right now we have the pools setup on the AS5300 and I can't seem to get any "dhcp helper" options working. Thanks

Does anyone have an example config for an AS5300 where dialup users can get there IP from an external DHCP server on our network. Right now we have the pools setup on the AS5300 and I can't seem to get any "dhcp helper" options working. Thanks

The about router is a cisco 7507 with 256mb ram The router it connects to is: Cisco 7206 12.2(15) IOS 256mb ram interface MultilinkX ip address xx.xxx.xx.xxx 255.255.255.252 no cdp enable ppp multilink no ppp multilink fragmentation multilink-group X interface Serial1/0:0 no ip address...

I have a multilink group that just randomly locks up and cannot figure it out to save my life. Each T1 belonging to the multilink shows up/up The multilink itself shows up/up it just will not pass traffic A show interface shows LCP open and multilink open. Here is a sample of the config...

We have two devices that output SMDR data. One is a PBX and the other is an Internet Billing server. Right now we have them running into a terminal eliminator which has 4 slave ports and 1 master. Each device is plugged into a slave port and that info drops out the master port to the call...

I have a cisco 3500 xl series switch. What I would like to do is pass vlan tags through it across my fiber link to my gateway. Here is a small exable 24 pt switch vlans on each port uplink to the 3500 fiber across to my other switch gateway So i need the vlantag for port 1 vlan 101 to pass...

We get a BGP flap every once in a blue moon but it still knocks customers down for that short period of time. It is so fast the routes really dont have time to change and repropogate. Is there a command I can put in a router to lessen the blow so to speak on some of these flaps. Thanks

Ok how can I go about finding out why a session will not negotiate because this was working at one time.

I have a couple routers setup and now they are not sending BGP notifications to each other. When I do a show ip bgp neigh bgp state=active opens sent=0 received=0 etc It shows this on its two neighboring routers also Here is a striped copy of the BGP config router bgp 12345 no...

I have setup BGP and OSPF inside my network. I am consistently dropping a packet to my last hop when I do a traceroute for example If i trace to my outside interface it will drop one packet out of three in the trace response. If I move in and trace to sa and ethernet interface of another...

Nigel Thats for the suggestions. I wanted to make sure I was on the write track. Thanks Again

I am working on laying out a database. Here is what I have so far (in example format of course) tblOne usertypeid usertype tblTwo userid username userpass etc tblThree groupid groupname etc What I want to do here is allow users to join groups as members, or administrators etc. A user can...

I know there has got to be a better way to do this then what I am doing now. So I need to broaden my horizons. Basically I have a from where you can enter in user information (name, address, city, state, etc) and then I havea form where you can edit this information. Is there a simple way to...

I have two form fields. In each one of them I want to display time from 12 to 1 so I can have a start time and end time inserted into my database. How would I go about doing this is a form, select option type method. Thanks

I want to be able to check my url and if it containes index.cfm or just a path then do one thing and if it contains a certain file (e.g. house.cfm) then do another. How would I start to go about doing this. Thanks

I am setting up a newsletter engine. I have three tables and they are as follows Table1 Memberid Member_email etc Table2 Listid Listname Table3 Varid Listid Memberid Each member should be able to subscribe to multiple lists. This is where table 3 comes into play. The meber id is stored...

...2 set transform-set asp crypto map transam 65535 ipsec-isakmp dynamic dynmap crypto map transam interface outside isakmp enable outside isakmp key ******** address xx.xx.xx.xx netmask 255.255.255.255 isakmp key ******** address xx.xx.xx.xx netmask 255.255.255.255 isakmp identity address...

check out http://www.forgetfoo.com he has some tutorials on building a blog and comment system specifically for CF

I am multihomed with my two providers. Both providers are accepting routes from me. The problem I have is provider 1 ips are going in provider 2 pipes. I only want this to happen when provider 1 fails. Is there a weigh to configure the routes so that this will happen. I am using BGP with my...

Terry, I have done this already. All of my other networks are being annouced except this one. It is stuck on the wrong CIDR information in the route table. So instead of being xxx.xxx.xxx.xxx/22 it is xxx.xxx.xxx.xxx/11 Thanks Ron