We have been backing up one of our servers to a LTO 100/200 GB tape for quite awhile now. The backups were aroun 125GB worth of data, but through the hardware compression, they were fitting on the tape.
This week we installed the encryption option, and now the backups will not complete...
In trying to solve one problem, I may have created another.
I deleted one of the Extension IDs, and now I cannot seem to find a way to re-create it so that I can change which extension goes along with it.
Does anyone know of any way I can get this extension ID back?
I have an Avaya IP Office IP401, with 3.0(40) code on it.
This particular unit will have a problem once every few weeks. What happens is that any calls to/from the unit over the analog lines have such bad/loud static that it is not possible to hear/talk on the call.
Calls made over SCN to any...
We have several branch locations each on version 3.x
When they call into our main office(ver 2.27) and are transferred either to another extension in our main office, or to our Operations center(2.27) the call usually is just dead air. Neither party can hear the other one, although it appears...
The problem was/is that I was printing from an HP3000 running MPE, and it can only print to an HP JetDirect.
Thankfully I was able to find some software which allowed me to be able to emulate an HP JetDirect, so that I was able to capture the print stream.
milehighip - Thank you, now a couple of questions:
1) Is there no need for a N# in any of those short codes, or are they as seen above?
2) In the short code for site B, is the Number 101, or *101?
3) Does the person doing the parking at site A do anything different?
4) What exactly does someone...
I do have that short code at SiteA, put it is setup to go to the "local" line id, and not across the IP line.
Do I need to create another one that will "look" across the IP line to SiteB?
Thank You.
Thanks - does the code need to be *99*N# The reason I ask is that we already have a short code which begins *99, so I set this one up using *97*N#, and all it does is ring the extension I dial, rather than pickup the parked call.
Anything that I might need to do on the "a" side?
Thanks.
We have been performing MS Office Updates using WSUS. The updates work well, however we are running into a problem.
After the update is performed, the 1st time the user opens an Office program it asks them to accept the EULA. Since they are not Machine administrators, it lets them accept the...
I have the following scenario:
Two devices connected on their own VLAN, to Switch A let's say their IPs are 10.1.1.1 and 10.1.1.2.
I have a router also connected to switch A, which currently routes traffic from networks 10.10.0.0 to 10.20.0.0(remote location). The devices on the 10.10.0.0...
Thank you both.
I probably should have explained something first.
I am not a DBA - our DBA does not "work" for our company. Our DBA says he does not know how/if he can recover the data.
How do I know if we are in ARCHIVELOG mode?
Thank you.
We had a problem last week with our database, which unfortunately was not fully discovered until Monday. We restored from the Wednesday backup, last week and did not get very far with the recovery before problems arose.
How can I recover the data, that should be good, which I am missing from...
Thank You.
Actually, I am seeing it in CCV, CCC and the Call Status App. In CCV I thought I was looking at Group calls, I will double check. CCC I know the reports are looking at the ring group, I will check that as well.
I have been wondering what has been causing the alarming rate of Lost/Missed calls we have been seeing in our Call Center.
I found out that anytime a call comes in to our remote Office, and is transferred to our Operations Center(where the call center is) it is generating a lost/missed call...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.