Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. BAsh12

    SMTP to outside not working.

    do a "clear xlate" see if this clears it.
  2. BAsh12

    PIX515 - VPN Not Configured Correctly

    Not allowed to do that, sorry. You have to have a Smartnet with Cisco. It is illegal.
  3. BAsh12

    PIX515 - VPN Not Configured Correctly

    Can you ping anything? If yes can you manually map a drive? If yes, then it is working, browsing is not permitted over VPN.
  4. BAsh12

    PIX515 - VPN Not Configured Correctly

    The above should work. do a "debug crypto isakmp 128" "term mon" and then monitor what goes on.
  5. BAsh12

    PAT Help

    Can you do me a diagram? Your PIX is capable of running the V8, buying new may be a waste. If this is VPN, yes it can, normal traffic not sure but I have spare PIX/ASA so can give it a try.
  6. BAsh12

    PAT Help

    You said it was for a specific VLAN, do you have a target subnet on that vlan? If so, route to that.
  7. BAsh12

    internal access to DMZ outside IP's

    I have completely re-written tha access list, all of them. Back up your config and remove ALL access lists and start with the following. IF you do have an internal ISA server make sure that any traffic going through it to the DMZ is not natted otherwise it will not work, have seen this before...
  8. BAsh12

    PAT Help

    I think the port map error is a red herring. What are your routes reading? You have 2 connections to 2 ISPs, how can you do a route for all zeros to both.
  9. BAsh12

    internal access to DMZ outside IP's

    A quick question, are you using a proxy server internally?
  10. BAsh12

    internal access to DMZ outside IP's

    We ned to re-write, if you look at the acces-list statements above they are almost the same as the ones I am writing. I will look at this in the morning, re-write and get it back to you. We will definately get this working by tomorrow :-)
  11. BAsh12

    internal access to DMZ outside IP's

    no nat (inside) 0 access-list inside_nat0_outbound no nat (inside) 0 access-list inside_nat0_outbound_1 outside nat (inside) 0 access-list nonat
  12. BAsh12

    internal access to DMZ outside IP's

    Er, just think I may have seen what the problem is, you do not have a route to the DMZ. route dmz 30.30.30.0 255.255.255.0 30.30.30.100
  13. BAsh12

    internal access to DMZ outside IP's

    Er, just think I may have seen what the problem is, you do not have a route to the DMZ. route dmz 30.30.30.0 255.255.255.0 30.30.30.100
  14. BAsh12

    internal access to DMZ outside IP's

    also put this in access-list inside_access_in permit tcp object-group local-lan object-group dmz-www object-group www
  15. BAsh12

    internal access to DMZ outside IP's

    try this before you do anything nat (dmz) 1 0.0.0.0 0.0.0.0
  16. BAsh12

    internal access to DMZ outside IP's

    got to be carefull of the access-list order. Would be easier if we convert all the access-list to use object-groups.
  17. BAsh12

    internal access to DMZ outside IP's

    have you removed everything we tried?
  18. BAsh12

    internal access to DMZ outside IP's

    You have this:- access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.0.0 255.255.255.128 try changing it to this, do not remove it yet because you can put it back any time. object-group network dmz-www network-object host 30.30.30.1 network-object host...
  19. BAsh12

    internal access to DMZ outside IP's

    You have this:- access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.0.0 255.255.255.128 What is the last bit doing by the way, 192.168.0.0 255.255.255.128? is this your VPN clients?

Part and Inventory Search

Back
Top