Search results for query: *

Does anyone know if and how the outgoing network port on the 4620 phone can be disabled so it can not be used? Thanks for your hep.

Thanks Pndscm. You are right it was a CSS issue. There were two assist/mgrs that I was trying to configure and they each had a different wrong combination of the CSS-M-E and CSS-I-E combination.

Can't get the immediate divert key on the assistant's phone or the intercept key to work on the manager's phone. IPMA seems to be working well with everything else. Any ideas or thoughts? We have call manager 4.0.

Our company is in the states. Good luck.

New development here. I ordered 2 new 4602 phones. These came with a power converter that allowed to use the 4602 on the cisco 3550 switch. I am in the process now of checking to see if I can order any of these seperatly. There is a selecter switch on this device for different cisco in-line...

I left this same post in the Avaya: Definity forum. Is anyoneone using the 4602 IP phones with a cisco 3550 w/in-line power?? We are trying to set some up in one of our locations. They seem to work ok with the cicso in-line power blade switch but we are having problems with the above...

Is anyoneone using the 4602 IP phones with a cisco 3550 w/in-line power?? We are trying to set some up in one of our locations. They seem to work ok with the cicso in-line power blade switch but we are having problems with the above switch. The odd thing is that our 4610IP phone works fine...

Hopefully my question will make sense since I do not know all the technical terms. Here goes. . . I have a definity PBX in our main location. Attached via a t1 line is a prologic system. There are no other incoming our outgoing lines. All calls go through the definity (except of course...

The phone is on an analog port and the field on both extension set ups were set to Y. Thanks so much. I hope this does it.

We have a board with a "fancy" phone that has speakers in the ceiling and works via a display panel that sits on the table. There have been several instances of the phone displaying that there is an incoming call in approx 15 minute increments. At first we thought maybe it was a fax machine...

Does any know it can or better yet have set up an Avaya 3626 wireless phone to autentic against wireless using PEAP or 802.1x.

When I do the command display system-parameters customer-options, it says Yes for the restrict off-net call forward. Where can I change this and what will it effect? What I found that I can do is set up an extension and forward that extension to the cell phone. It is a bit messy this way...

My helpdesk is open M-F 7am - 9 pm Sat closed sun open 4-9 I have the current vector in place. . . 01 goto step 6 if holiday in table 1 02 goto step 8 if time-of-day is sun 16:00 to sun 21:00 03 goto step 6 if time-of-day is all 21:00 to all 7:00 04 goto step 6 if time-of-day is fri 21:00 to...