Search results for query: *

Hi all, Anyone tried BS450's standard MLT connect to Cisco 4506's Ethernet channel ? Is it work ? Regards. M1227

More information: BS5510 using SW:v4.2.1.004 BS450 using SW:v4.4.0.6

Hi all, Here is the story and make it simple. I had a Nortel networks with couples of 450-24Ts (Named as A450 and B450) and 5510-48T (Named as A5510) in single VLAN1. Connection as below: A5510 ==(2 x 100M MLT)==> A450 ==(2 x 100M MLT) ==> B450 Workstation 1 (WS1) connected to A5510. Server 1...

Hi all, Previously, I am working in Nortel site. Start from coming year, we are planning to use Cisco product. For core, we would like to purchase 2 x 4506. By design the 2 x cores will be linked with 4 x 1G ?. Hereby, what is the methods to link that 2 x 4506. LACP (IEEE 802.3ad) on layer 2...

You see the Power On Seft Test screen ?

Hi all, Anyone tried Ethernet Routing switch 5510,5520,5530 software release version 5.0. It's now support VRRP and OSPF like a Passport 8600. I can make use of two switches as a core in cheaper way. Any comments ?

I had both BS350 and BS450. M1227

Try to add static route at 8600. Example: Dest X.X.62.64 Subnet 255.255.255.192 Next Hop X.X.62.126 Dest X.X.62.128 Subnet 255.255.255.192 Next Hop X.X.62.190 Dest X.X.62.192 Subnet 255.255.255.192 Next Hop X.X.62.254 450 is layer 2 device, do not need to cater.

Follow up status: The counter is reset after reached 2 ^ 32 limitation. The switch is still function only the uptime start up again from 0 day 0 hours 0 mins. P.S: MID ID = 1.3.6.1.4.1.2272.1.1.10.0

IP address for network switch mainly for network management. Use a RS-232 connect to the console port at BS350-24T is only way to assign IP address.

Hi all, Can I know how long is your Nortel equipment up-time ? When I using SNMP to collect my Passport 1200 status, the up-time has already passed 488 days. Together with the status, a counter is called "timeticks", it showed 4,217,664,900. With calculation, 4,217,664,900 / 60 / 60 / 24 *...

Thanks ~

Hi all, What is the default live time for ARP tables on Cisco 6509 with Supervisor engine 720 ? Thanks in advance.

Can you show the 8600's routing table in here ? I also like to know the IP address of 8600. Thank you ! M1227

Thanks Biv343, yes Nortel dones't had much EOL announcements as I saw. anthonyanderberg, your comments is a nice information for me. Cheer ! M1227

Thanks JeroeNortel and netmanrick for comments. M1227

Thanks for your answer, djperterson. Your answer is totally different from daganaget. ^^

As a technical standpoint and working with both Cisco and Nortels support; if the Cisco was $100,000 more than the Nortel I'd still go with the Cisco. Thats unless you like to drink Alcohol heavily...... ==================================================== The above answer should pass to Nortel...

Is the STP (Spanning Tree Protocol) disable on the 5510. It seem that, a loop inside the network. M1227

There are many reasons. 1. DHCP server is not function. 2. DHCP server is not in the same VLAN of workstations. I think you should already assign a IP address for 5510 as management IP. Try to ping the 5510 from workstation to prove workstation's NIC is working. (Must be same subnet) Waiting...