Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Suzuki Yota

    HiPath 3800 not booting after power outage

    Hi, We have HiPath 3800 system, which not currently in a boot loop after power outage. All cards showing red alarm. Below is the output from Serial console. Which keeps repeating. Any idea what happened? loading FPGA: Load O.K. testing Checksum Firmware: Test O.K. testing...
  2. Suzuki Yota

    Trunking Hipath 3800 with Freepbx

    Hi I want to connect Hipath 3800 with Freepbx. Currently I have Digit TE122 card installed in Freepbx system. Is it possible to connect Hipath's DIUN2 interface to TE122? If so what's the cable pinout for this connection? Thanks
  3. Suzuki Yota

    HiPath3800 CBSAP interface down when STMI2 card is installed

    I already have changed IP Access to HIP. Now I'm unable to access using IP of LIM even if I reset HG1500 board.
  4. Suzuki Yota

    HiPath3800 CBSAP interface down when STMI2 card is installed

    I'm unable to access via Manager E using IP of HG1500. It says "The attempt to connect was rejected". But I can access HG1500 Web UI. Default route is set there.
  5. Suzuki Yota

    HiPath3800 CBSAP interface down when STMI2 card is installed

    If I change protocol to HIP, will I still be able to access through same IP address specified on LAN interface?
  6. Suzuki Yota

    HiPath3800 CBSAP interface down when STMI2 card is installed

    Now I have changed HG1500 IP to another range. IP on LIM is 192.168.70.100 IP on HG1500 is 192.168.31.6 To transfer config through Manager E, I have to reset HG1500 via web interface and wait for LIM to respond. Once HG1500 backs online LIM goes down.
  7. Suzuki Yota

    HiPath3800 CBSAP interface down when STMI2 card is installed

    I have installed a STMI2 (HG1500) card on my HiPath 3800 system. As soon as the STMI2 card boots up ethernet interface on CBSAP card goes down. I'm unable to access the system through Manager E. But I can access HG1500 web interface. Both cards have same IP address range. What could be the issue...
  8. Suzuki Yota

    Change digital station to an analog station

    Thanks samprodec! managed to physically change the line
  9. Suzuki Yota

    Change digital station to an analog station

    Hi, I have HiPath 3800 with SLMO and SLMA cards. I want to change a digital station which is using optiPoint500 phone to a regular analog phone. Is it possible to change the station to analog through HiPath Manager? I'm new to this, any help is highly appreciated. Thanks Suzuki
  10. Suzuki Yota

    SIP trunk between HiPath 3800 and 3CX

    Hi, I'm going to migrate HiPath 3800 to 3CX PABX. Currently I have over 200 lines, so I'm thinking trunk two PABX and then slowly migrate to 3CX. What kind of card I need to install in HiPath and do I need purchase license? Thanks
  11. Suzuki Yota

    HiPath 3800 call forwarding to external number

    Hi. I was trying that with Target 2. That's why it didn't work before. With Target 1 it is working as expected. Thanks for your help.
  12. Suzuki Yota

    HiPath 3800 call forwarding to external number

    Hi, I have HiPath 3800 Hunt group configured with 4 extension members. I want all the call to the pilot number to be forwarded to an external number. I enabled call forwarding from hunt group extension each by each. But it does not forward calls coming to pilot number. Is there anyway I can...

Part and Inventory Search

Back
Top