Before I would buy a new processor, I would try to reinitialize the processor [F989 - 25327]
You may want to do a back-up first. If no trouble after reinitializing the processor you could try a restore. If after a restore the trouble comes back - Reinitialize and re-enter the data manually.
Hey Everyone,
I appreciate all the suggestions (and anything else that may come to mind).
This is the situation. This was a residental install. It replaced a TIE system that the customer had for a lot of years. They were used to being able to toggle on/off the ring in the bedrooms,(22 Phones)and...
Hi All,
Does anyone know of a way to temporarily suspend Co line ringing on an ACS R6 - and still allow intercom calls
eg: Conference room, Bed room.
Any help is always appreciated. Thanks!
Thanks TT,
I really didn't think there was a way, BUT you never know till you ask
I'll probably leave it at an auto cover w/1-ring and set the other phones with voice announce auto dial
Thanks again
Does anyone know of a way to transfer a call directly to a mailbox on a pc mail card?
I have a partner ACS R6 in a residental home. After several rings, the VM picks up and says "Thanks for calling - no one is available" "To leave a message for "A"
press 1. T Leave a message for "B" press 2.
If...
Thanks Phonman123
If you have it laying around, and you can tell me how to get into programming, that would be great,(But don't go out of your way) I tested a few of the ports, and it seems that they have line access and ring on all co buttons. As I said before, It's for free and for a friend...
Does anyone know how to get into programming for an asuzi 616 (I can hear the laughing) I have an old one that I would like to give to a friend for a start-up business and it would be helpful if I could program some line ringing, and possibly restrict out-dialing on one phone. THANKS!
hi TelNetSystems,
A couple of years ago, I was having a lot of trouble with MLX-20L's and MLX-10D's. What I found to be the trouble was defective LED's. After the phone locks-up, shut off any surrounding lights. You should be able to see a faint glow from the bad LED. I think the (sneak) current...
hi TelNetSystems,
A couple of years ago, I was having a lot of trouble with MLX-20L's and MLX-10D's. What I found to be the trouble was defective LED's. After the phone locks-up, shut off any surrounding lights. You should be able to see a faint glow from the bad LED. I think the (sneak) current...
Hi twofeathers,
you didn't mention if your current configuration is requiring one or two carrier's. If it's two, it could cost you $$$ to upgrade to an ACS.
Can anyone tell me what code is used (ex; LK4 + DP15 = day ring) to add hotline/DSS keys to a phone on a professional level-1? Also is ther possibly a copy (extension) program code? Any basic codes would be a great help. Thanks for your time and your help!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.