Tom, Once again you saved me. Turning off the Name auto correct in the General Options settings did the trick.
I had noticed in previous things I have done that although I had changed a name to a newer "correct" name I sometimes had to start from scratch to get things to work. So this will...
Tom, Thanks for hanging in there on this for me.
I tried adding a "Save Record" command button along with a separate "close" button. When either tabbing, using enter or even mouse clicking on the "Save Record" button, nothing happens. I took away the "close" button wiht the same results.
So I...
Thanks Tom,
As usual you advise worked but there is still a problem. I have set the form to be data entry, but only the last entry before exiting the form is posted to the table. Also the form does not clear when returned to the top as with "normal" data entry forms. Is there a setting missing...
I have 2 tables One is “Item master list” which contains Vname, Item no and description.
The other table is “Item Purchases” and the fields are Vname, Item no, description, date, qty and price.
I created a form using all the fields in “Item Purchases” except the item no. For this I created a...
OOPS!!
I thought everything was great but found out that although the form fields are being populated the table in which they are to post is only being populate with the first column item (out of 3).
to review for a moment. The combo box source is a table called Master item list which...
I will take your advise about using "name" for a field.
The sort worked great. I knew I had done it before but just couldn't remember how.
Thank you for your help!!!
I deleted the combobox that was on the form. Put on a new combobox and changed where the informaions was coming from. I changed the bound column to column 1. I also changed Name to VName. I'm not sure if changing the name was necessary because I have used it as a field name many times...but what...
I had posted a similar problem to this prior but I have changed all the parameters for what I’m doing. So here goes.
I have a form, where in, I want to be able to enter Vendor name, Item No, Item description, date purchased, Qty and Price.
I want to populate the first three fields from a Table...
The rowsource is as follows
Select [items].[name],[items].[item no],[items].[description]From items;
I'm not sure I understand what you mean by what method I'm using.
The Name is enterd from the combo directly which was set up in the combobox setup. the others are done with the code
above.
When I try to populate a form's fields from a combobox it works ok for the first of the two fields being populated all the time but it only works the first time for the second field being populated.
The combobox has vendor name, item no, and description. When I enter a new record all is well...
Freestone,
My mistake. I see now where this board has the DualDDR memory controller.
Am I correct in saying that using PC3200 memory offers no advantage over PC2700 memory with the AMD 2500 processor? Although the board supports 400Mhz FSB. The specs I see on the 2500 processor is only up to...
Here's my $.02. If I were building a system using that MB I would suggest the following. I hope someone will correct me or echo my suggestions.
First, I use almost exclusively Biostar MBs. Since I build quite a few systems It makes it easier because the settings, wiring and jumpers are...
I had to get the system back to the customer. It was under warrantee and they were in a hurry.
I replaced the mb, processor, memory, PS and cables. I used the same HD and CD. System powered right up, and after self installing the new MB parameters, it ran fine.
I have kept all the other...
The hd light is lit, as is the cd light.
If I set the Bios to default settings I can't get past the "Verifing..." In Safe mode it gets past this but reboots at the first loading item in safe mode.
If I set the start up for the CD first with my XP Pro disk It goes through all the loading...
The system is about a year old. It has worked ok until a couple days ago. Customer reports that there was no warning. he just turned it on in the morning and got what we currently have. The hd light is lit as is the cd light.
I replaced cables and checked for master slave etc. on the drives and...
The system is about a year old. It has worked ok until a couple days ago. Customer reports that there was no warning. he just turned it on in the morning and got what we currently have. Lit hd light and lit cd light.
I replaced cables and checked for master slave etc. on the drives and tried...
I have changed MB, Processor, Power supply, Memory, Hard drive and cables (all one at a time). But my startup (restarting)problem persists.
If I set the Bios to default settings I can't get past the "Verifing..." In Safe mode it gets past this but reboots at the first loading item in safe...
Thanks for the information. On larger networks that I have I use Windows 2000 Professional Server.
The smaller networks that I am referring to here all use XP Pro and are generally all peer to peer with no server.
Although I understand the addendum you have posted here and, have printed it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.