Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. LeslieAnnBailey

    Backup Exec doesn't see any media

    Reinstalling BackUp exec fixed it
  2. LeslieAnnBailey

    Backup Exec doesn't see any media

    I have run an install on BE and saw it install the drivers for the library but still doesn't show up in devices...Any help will do! Thanks Also, If I uninstall and reinstall backup exec, can i still access the previously backed up data?
  3. LeslieAnnBailey

    Backup Exec doesn't see any media

    My server sees the SCSI Card and the changer as well as the drives in the changer, however backup exec doesn't show any devices and no media. I recently changed the SCSI card but I have since put the old one back in and still have the problems. I have the SCSI ID on the server set to 1, the...
  4. LeslieAnnBailey

    Setting up a second 2821 as a VPN Concentrator

    Can I email you the diagram as it should look?
  5. LeslieAnnBailey

    Setting up a second 2821 as a VPN Concentrator

    I am trying to figure out how the confiugrations will look as far as the IP's go on the segment after the 2821 for the VPN does its authentication and encrypting. Would that 2821 need to have an ip that is on the network already? Would I need to add a secondary IP on the main router on the...
  6. LeslieAnnBailey

    Setting up a second 2821 as a VPN Concentrator

    I have a 10 Mb Fibre connection coming into a 2821 ISR that is doing NAT, etc... I have had issues in the past getting site to site VPN's working on it... The company recently purchased another 2821 with the SSLVPN module in it. I am wondering if I can set this router up strictly for VPN and...
  7. LeslieAnnBailey

    Cisco Network

    That is correct.
  8. LeslieAnnBailey

    Cisco Network

    Below is the config that I thought should work but it seems to be blocking traffic in both directions. access-list 107 remark auto generated by SDM firewall configuration access-list 107 remark SDM_ACL Category=1 access-list 107 remark DENY PERIMETER access-list 107 deny ip host 172.20.0.0...
  9. LeslieAnnBailey

    Cisco Network

    This is a Cisco 2821 Router. We are not using managed switches at this time, they will be added later.
  10. LeslieAnnBailey

    Cisco Network

    Both subnets access the same interface on the router. The 172.20.x.x is setup as secondary subnet gbe 0/1
  11. LeslieAnnBailey

    Cisco Network

    I need help in setting up access list that will allow anything on 192.168.1.x to access everything on 172.20.x.x but will not allow 172.20.x.x to access anything on 192.168.1.x. Thanks

Part and Inventory Search

Back
Top