Search results for query: *

ok, I will try all of your suggestion and I will update you.. Thank you guys!

ok, I will do that, but one question, does routing of LAN1 necessary even though I am only using LAN2 for the H323 trunk?

ok, im posting the config file, please have a look :)https://www.dropbox.com/s/wjjzj9wlkpmy7sm/Tasheel%20Barsha.cfg https://www.dropbox.com/s/p2v8qdw0z7s3rql/Tasheel.cfg

Sorry bout that... 192.168.11.10 is nothing.. ill upload the config file in a few mins.. thank :)

192.168.10.205 and 11.205 are the wan IP addresses of each IP office.. I've tried doing that Ip route you are suggesting but the other site wont ping.. so I have to put the specific ip address of each boxes..

It is the wan ip of site A.. scn are configured through Wan port

this is what I see on the sysmon

yes, they are both h323 trunks, gateway ip address is the IP address of the opposite site.. this will be my 3rd time to setup SCN, first two was a success with Sonicwall and Checkpoint firewall, this site has Draytek 2830 which is my first time in setting up SCN on this router..

okay, so it turned out that SIP ALG is disabled on the draytek router, there is not option for H323 alg as well.. any other ideas?

currently, they are using Draytek 2830 on both sides, Could it be SIP or H323 alg? Im just waiting for the network admin to arrive and we will try disabling the ALG on both.. if this didnt work, any other suggestions?

okay, I just found out that its just an IP route issue, below is my new IP route settings.. Both sites are pinging now but SCN still shows down, tried recreating H323 trunks and rebooting the system but it seems it wont go up. I believe it has something to do with the network, but how can I...

I tried pinging Site A IP Office to SIte B using system status and its pinging, same thing when I try to ping form a computer I tried pinging Site B IP Office to Site A using system status but its not pinging, but from computers, I can ping to the remote IPO

oooopss, yeah its a typo, Site B IP range is 192.168.10.X and not 192.168.12.x

sorry, I didnt get you, can you please tell me whats wrong with my config?

i did this setup and its not working.. in addition to my config above Site A IP Route 0.0.0.0 0.0.0.0 192.168.11.1 Lan 2 Site B 0.0.0.0 0.0.0.0 192.168.10.1 Lan 2 still it is showing SCN status DOWN.. anyone who can help me with this?

for the Nortel 1120e phones, there is an option for Timed Log off, please check if it is enabled other wise make the duration to "permanent" so it will not be logged off until you log out.

...do something like this. Site A Wan IP --> 192.168.11.100 (same range as LAN A) Site B Wan IP --> 192.168.12.100 (same range as LAN B) Create IP Line for Site A with Site B Ip Address (will do the same for both) Make IP Route for both sites.. Will this work? **SCN licenses are already uploaded

we tried doing that, I cannot ping the system but from that system, I can ping that other laptop.. they are on the same VLAN and the weird thing is , they cannot ping the IP Office IP.

@amriddle,sorry my bad, Shamz is my colleague, ill just respond to the other post. please close this thread..

We have a scenario here, there are 2 VLANs , Voice VLAN 6 and Data which is VLAN 4.. Customer is using 3com switch, all Nortel phones are working perfectly with Voice VLAN , however, when we connect the Avaya phones (1608), it keeps on finding router and its not registering at all. All avaya...