Search results for query: *

Hello everyone and happy new year. I have a problem with a TLU79 board connected to 3 ISDN BRI devices (2 lines for each). Almost every day I have to restart the board because it blockes. Here the ALLIP printout: CODE CLASS NOAF EXPLANATION 30 1 1 INCREMENTATION ALARM FOR...

Case solved like this: 1) Removed all cards from MAG1 2) DSU in MAG1 disconnected from LSU in MAG0 3) Restarted and, in the meantime, inserted RG5DC in MAG1 and switched on of the latter. When the MAG1 RG5DC was switched on, there was a noise similar to a relay that is energized continuously and...

Goodmorning everyone I have a problem with an Ericsson MD110 PBX with 1 LIM and 2 MAG version CXP1010015/5/BC11SP11/R1A. After turning on the PBX and connecting the LPU Board display, the system shows various error codes (28xx, 31xx, 32xx, etc ...)and does not start. The telephones remain off...

Fixed, the problem consisted in an incorrect setting of the dip switches in RG5DC board Thank's!

Good day everyone, I have a problem with a MD110 PBX version CXP1010015/5/BC11SP11/R1A This PBX has 1 LIM with 2 Magazines In the MAG 0 there is 1 ELU29 in position 1-0-60 whose extensions work regularly. In the MAG 1 there are 3 ELU29 in position 1-1-50, 1-1-52 and 1-1-60; the first 8 analogue...

The version is CXP1010115/4/TSWSP05/R6A

Yes, I need to answer calls on adn without pressing the button

Hello everyone and thanks in advance for the attention you will give to my message. On a Dialog 3213 I created hot-lines. To answer the incoming calls on these hot-lines it is not enough to lift the handset, but also to press the corresponding key. Would it be possible to answer calls simply by...

You can try using Parallel Ringing, if you have the right release

Hi, it works perfectly. Thanks

Hi, thank you so much, I soon will try.

Thanks SNOR, I have EXTERNAL LINE QSIG Allowed=30 and Used=30, but I would like to configure the QSIG on a BRI, not on PRI. Have I to change something in parameter SEL or SIG or serv? Thank again.

Good Morning, does someone can help me to configure a Q-SIG on a ISDN BRA? The MD110 release is a BC11 SP11. I already set the Q-SIG like this: ROCAI:ROU=100,SEL=511010000000001,SIG=111100000030,TRAF=00151515,TRM=5,SERV=3110000001,BCAP=101100...

I apologize for the use of capital letters, but I did it just because I was simultaneously connected to my pabx and the credentials are entered in upper case, so I forgot to go to the tiny I thank you for the advice I'm checking what you have suggested

HELLO EVERYONE OUR NETWORK PABX is FORMED BY A CENTRAL NODE AND DIFFERENT PERIPHERAL PABX CONNECTED BETWEEN THEM EITHER BY PUBLIC NETWORK THAT THROUGH PRIVATE NETWORK. CALLING FROM PUBLIC NETWORK ONE OF PERIPHERAL PABX AND ASKING THE TRANSIT TO ANOTHER PERIPHERAL PABX BY PRIVATE NETWORK, IT...

Hi, I'm new at forum. I'd like to ask you how to change the answer incoming call key from a position to another. The divice is a CTT10. I found the manual and disks, but the secon one don't work. Thank you very much. P.S.: I do apologize for my english