We have a CS1000 v7.0 and the GUI as well serial via PuTTy will not allow login. I have also tried to login in via serial PuTTy with the admin account and that does not work either.
I can log into the ssh of the EM Server Linux Base with my usual username and password as well as the admin...
Thank you. I will connect to the COM port and see what's going on. The LED currently is in a RED state. When I rebooted it yesterday it seemed to boot correctly and establish connectivity with the HMS server but nothing else. Thanks again, I will post once I've rebooted and captured the output.
Just more information as well. Im able to login to the HMS server via RDP session 0 and see that the HMS is up and running clean just no calls from the CM will travel across to it.
Thank you, I have looked at the server they are talking to and it indicates that all is well and good. The Elan and Tlan are connected and showing small traffic. also the link lights on the front of the CPDC card are showing connectivity.
This is connecting to a HMS400V2 server and we have...
Thank you all in advance for looking at this!
I have an issue with a CS1000 Rls 7.0
I can access the switch via COM Port and can login and access loads, but that is the extent of what I'm able to access currently. When trying to ssh to the core addresses Putty just hangs and will not respond...
Shared Line Configuration Issue
I currently have a client with a UC520 ( I know what your all thinking... ) that is having an issue with the shared lines on there phones. The Main BTN points to shared line Ex 2075, that hunts to shared line Ex 2076 and the to shared line Ex 2077. The...
I have an MICS and would like to determine if it has a PRI code already installed. I have run into an issue in the past where I looked to see if the PRIA or PRIB was available thinking they would not be present otherwise, but of course that is wrong. Thanks for your help.
Thanks for the information. Unfortunatly its not working for me? I have tried the user name and password of the PBX at the CLI and to no avail.
What I am trying to do is change the Voice Lan address.
I have a media card that we are running a few IP phones off of that is in an option 11c. The individual that programmed it is long gone and cannot be reached. Is there any way I can reset the user name and password without losing the information. My client has changed their IP string and in need...
I have a media card that we are running a few IP phones off of that is in an option 11c. The individual that programmed it is long gone and cannot be reached. Is there any way I can reset the user name and password without losing the information. My client has changed their IP string and in need...
Ive decided to print what Ive done in the BIOS thus far, but to no avail. For some reason I continue to get error codes back? Thank you to anyone who can shed some light at the end of this tunnel?
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]...
Thanks for the response! Yes I have entered the BIOS via the reboot and JKL at the second line of commands as well as entered the help menu to access all of the short cut codes, but for some reason the ability to change the password and user name has escaped me. Im almost sure im inputting the...
I have a media card that we are running a few IP phones off of that is in an option 11c. The individual that programmed it is long gone and cannot be reached. Is there any way I can reset the user name and password without losing the information. My client has changed their IP string and in need...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.