Search results for query: *

Hi I have a Contivity 1100 Diskless VPN device. I cannot find the backup and restore guidelines for this model. Does anyone have a link or URL? Thanks

Thats the hard part. It is already dual homed and in operation. The other switch port it is homed to looks exactly the same. I did a SPAN and captured 700Mb of traffic and its all SMTP and associated plus management traffic. There are a lot of out of sequence packets and packet fragments if that...

Thanks. here it is. sh access-lists 115 Extended IP access list 115 10 deny tcp any any eq 4444 (540 matches) 20 deny tcp any eq 4444 any (8069 matches) 30 deny udp any any eq 4444 (126 matches) 40 deny udp any eq 4444 any (739 matches) 50 deny udp any any eq 1434 (136...

Hi I installed the Secure Remote client on my laptop for work but have had to uninstall it as it stopped me being able to browse by screwing up the DNS. This was without the VPN connected! I am told this is a bug and there is a fix. Does anyone know it? The client was SC_NGX_R60_HFA2_630000044...

#sh int vlan 150 Vlan150 is up, line protocol is up Hardware is EtherSVI, address is 0011.bc9c.2800 (bia 0011.bc9c.2800) Description: Exchange Server LAN Internet address is x.x.x.x/24 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 2/255...

I applied the accounting to the VLAN interface: #sh int mac-accounting Vlan150 Exchange Server LAN Output (510 free) 0100.5e00.000d(82 ): 8 packets, 960 bytes, last: 26344ms ago 0100.5e00.0002(93 ): 82 packets, 9348 bytes, last: 924ms ago Total: 90 packets...

Hi The output from the switching is below, but it does not support ip accounting. The last line is a bit odd though so I have pasted the interface output again below sh int fast 4/29 switching FastEthernet4/29 DTCSMSXB01 Throttle count 0 Drops RP 0...

Yes, i've had it checked and double checked. If it were that the NIC is being overwhelmed surely I would get some indication of the port counters?

Hi There is a single acl to prevent TCP or UDP 4444/4434 but it doesn't seem like there are enough hits to warrant the number of drops. Since I cleared the acl counters yesterday there are roughly 520 matches here but (see below) drops: Extended IP access list 115 10 deny tcp any any eq...

Here is the show run for that interface: interface FastEthernet4/29 description ********* no ip address switchport switchport access vlan 150 no cdp enable end The server is Exchange and it is patched directly in. Thanks

Hi I have an issue with a server uplink on a Catalyst 6500. The Output Drops are incrementing yet I have no other interface errors. I have used SPAN and wireshark to look for excess broadcast etc but found nothing but general SMTP traffic etc. Interface Output is below: FastEthernet4/29 is...

Thanks for that. It was a stupid mistake that was causing the traffic to the DMZ from outside to fail. The DMZ security level was 0........... I typed part of the config sample and ASSumed I had set the DMZ to 50.

I have a problem with basic access through an ASA 5505 SEC bundle with DMZ enabled. The symptoms are: ssh to 10.10.10.83 works to 192.168.50.1 inside 1433 from 192.168.50.129 dmz works to 192.168.50.1 inside ssh and 80 to 10.10.10.82 denied 192.168.50.129 dmz I cannot see why. Am I missing the...

Hi I have a request to allow SSH through an ASA to an internal server. I already have ssh management access configured with; aaa authentication ssh console LOCAL and ssh permit 0.0.0.0 0.0.0.0 outside Which works. If I add an access-list and static to allow ssh through the firewall to...

That will allow client connections to the ASA only, with no access-lists required.

You If you ping from one LAN to the other and debug crypto isa and debug crypto ipsec, what does the output tell us? Could you post it? Without the VPN configs from each end it is hard to tell but if you cannot ping from LAN IP to LAN IP, the tunnel is not configured correctly.

That's interesting. I have only ever used it as layer three interfaces, but want to extend VLANs via this sort of setup. What is the maximum it can run over ethernet using two wires? I'm looking at using it to extend ethernet over 100 metres.

I have connected two SDSL routers back-to-back to extend an ethernet link in the past successfully. I wondered if anyone has bridged this type of connection in order to preserve VLANs over it?

It's an x20 Edge and the web page is unavailable, plus we can not access the unit with system manager and need to make changes. Any ideas?

Hi I have a watchguard that I cannot get conneected to on the GUI. It has developed a strange problem where the web interface that worked previously does not work any longer either. It is still passing traffic but needs some new services adding. If I connect a console cable will it be possible...