Search results for query: *

Thanks everyone. No longer getting static calls - had nothing to do with the clocking as it was a carrier issue.

CS1000 7.6 In LD 73 I printed DDB which shows my clocking from TN 0-0-2 and also 16-0-7. The secondary PRI at 16-0-7 is no longer active. Could that cause issue on our primary PRI as far as static calls?

The telco is saying the path from the central office to us is testing good, no alarms. There is a red light beside the CC indicator on the TMDI card but I don't know what that is indicating and if I should be concerned. I don't have another card to try...

Have a CS1000 at 7.5 with a single PRI (MegaLink here in Ontario). Every couple of days, it seems to go down for a few moments then comes back up. % DCH055 DCH: 14 RLS RED ALRM TIME: 4:17:15 1/08/2024 % DCH054 DCH: 14 EST REMOTE TIME: 4:17:19 1/08/2024 % DTA022 21 % DTA023 21...

I have just removed 200+ Avaya/Nortel telephone sets - 1120s, 1140s, 1220s and 1230s. They were all working when removed from service last week. Does anyone know a reseller within the Toronto, Ontario Canada area that may be interested? Thanks.

I have a CS1000 at 7.6. Incoming ext to ext calls are ringing in and can be answered but no audio on either the originating ext nor the destination ext. Outgoing calls from the destination have audio. I set up an enhanced trace from extension 2500 (TN 248-0-3-4, IP 10.35.5.149) to extension...

Thank you.

I did download that log, and searched but am not seeing any references to VO login or logout.

CS1000 at 7.6 I am using virtual office for some of my IP phones. Is there somewhere within the CS1000 that will log when a user logs in and when they log out?

Changed TRO on route to NO. Did a test call transfer, disconnected after 15 seconds. Removed TAT in VDCH RCAP. Tried to do a test call transfer, but call wouldn't transfer. Just fast busy. ADAN DCH 21 CTYP DCIP DES siptrk USR ISLD ISLM 4000 SSRC 3700 OTBF 32 NASA NO IFC...

Transferred calls from SIP Line are disconnecting after 15 seconds and I believe it is because the CS1000 doesn't support SIP REFER. I do not know how to fix this nor where to look. Anyone have a thought?

Yes, creating a DCH would certainly help! I created one: ADAN DCH 18 CTYP TMDI MG_CARD 000 0 05 PORT 1 DES SOLACOMTIE USR PRI DCHL 25 OTBF 32 PARM RS232 DTE DRAT 64KC CLOK EXT NASA NO IFC SL1 SIDE USR CNEG 1 RLS ID 35 RCAP ND2 MBGA NO OVLR NO...

I have some questions about using an NTRB21 TMDI card please. CS1000 at 7.6 In an MG1010 Cabinet 1. Can I use slot 5 for the NTRB21 TMDI card? 2. Would this card allow a TIE connection to an AudioCodes Mediant 1000 gateway? I created a new digital loop in LD 17 as loop 25 DLOP NUM DCH FRM...

So it turns out that the numbers - 101359 - are actually the start of the IP address - 10.135.9 - of a system I have set up in my NRS as a SIP endpoint. So now I need to figure out why it is sending those numbers. I am assuming that it isn't sending the last two digits as it reached a max of...

I setup D channel monitoring for outbound calling and the calling number that is being sent as extra digits at the end - the 101359 DCH 14 OMSG SETUP REF 00000001 CH 21 1 TOD 13:12:41 CALLING #:7057257025101359NUM PLAN: NUM UNKNOWN/UNKNOWN (UNKNOWN) CALLED #:7057304744 NUM PLAN...

I have attached a wireshark capture. https://files.engineering.com/getfile.aspx?folder=f2b422cf-773e-4647-90cb-b91b5cb40e19&file=Solacom_to_Phone.cap

Are there any timer settings within the CS1000 / NRS / Sig Server that would cause this to happen?

The call also disconnects when calling a 4 digit extension - see call trace below: ORIG VTN 148 0 00 00 VTRK IPTI RMBR 2 1 INCOMING VOIP GW CALL FAR-END SIP SIGNALLING IP: 10.35.51.103 FAR-END MEDIA ENDPOINT IP: 10.35.51.10 PORT: 21436 FAR-END VendorID: Tangerine-oSIP-UA/1.06 TERM...

Thanks for this suggestion. I did this, but it made no change. What I find odd is that the connection goes through so I don't understand why it would just disconnect after a successful connection.

CS1000 7.6 Calling to an external number directly from a desk phone works. Calling to an external number from a SIP endpoint disconnects after 30 seconds after called party answers. I set up DCH outbound message capture enl msgo 14 OUTPUT TARGETS: TTY . DCH 14 OMSG SETUP REF 00000007 CH...